View Full Version : xx4 one way
trekkerkk
26-06-2007, 05:29 PM
hi,
ive got an alli xx4 one way lesro apex whoever makes them with xx4 pulley fitted,what will i need to make it fit the x5,
just ordered the x5 squared conversion,
thanks
trekkker
Big E
26-06-2007, 07:41 PM
Stuart,
You will just need to change to the X5 pulley as it has one more tooth and you will be away!!
E.
super__dan
26-06-2007, 10:08 PM
If it's a Lesro one just ring Daryl and He'll know.
If it's an Apex one it will have to be modded as the flange on the XXX-S was much bigger so it mas to be machined down.
trekkerkk
27-06-2007, 06:23 AM
its a fit for a xx4,
got it off ebay,
so just change the pulley,
will the x5 pulley just fit or will it need modding
thanks
trekkker
Oliv996
27-06-2007, 09:54 AM
Hi Trekkerkk,
I'm affraid you will first have to increase the center diameter of the X-5 diff pulley and then decrease just a little the flange because the XX-4 front diff pulley inside diameter is larger than X-5 diff pulley inside diameter (that's the mods I've made for Antoine's one-way)...
Hope my English is clear enough :D
Olivier
Chrislong
27-06-2007, 10:31 AM
Hi Olivier, your English is better than most of ours!
I have created a word document with step-by-step instructions for how I alter the XXX4 Apex/DCR one way to fit the X-5, I can email this to anyone, but it may be different to the XX4 specific diff, I haven't had one of these to compare.
Chris
trekkerkk
27-06-2007, 11:07 AM
thanks to all for the info,
trekkker
Oliv996
28-06-2007, 09:27 AM
Hi Olivier, your English is better than most of ours!
I have created a word document with step-by-step instructions for how I alter the XXX4 Apex/DCR one way to fit the X-5, I can email this to anyone, but it may be different to the XX4 specific diff, I haven't had one of these to compare.
Chris
Thanks Chris !
Please to see you again next week ;)
Cheers
Chrislong
28-06-2007, 06:10 PM
Oh we'll be there probably tea time on Wednesday, I hope the rain doesn't follow. See you there. :)
_sleigh_
28-06-2007, 06:17 PM
You can take the rain Chris, please do. I don't want to get wet at the F1GP @ Silverstone. I remember the car parks from a few years back... not good.
Chrislong
28-06-2007, 06:28 PM
:D a bit boggy?
vBulletin® v3.8.7, Copyright ©2000-2025, vBulletin Solutions, Inc.