View Full Version : madrat
cragstar
06-06-2010, 01:32 PM
hi all just got a second had rat and wanted to no if the b4 diff fits ? as the one in it has had it
and if there is any other car make wheels that fit ? any advice would be great :D
nicefrog
06-06-2010, 05:00 PM
Kyosho Rb5 wheels fit, the B4 diff might fit if you can adapt the whole B4 rear end onto it, You'd have to get a B4 T piece and see how much different that is for starters, you might have to make a custom one, easier to just get new parts for the original diff?
kedal
06-06-2010, 05:14 PM
Or a B-Fast diff maybe :)
Battle_axe
06-06-2010, 06:23 PM
you can use the B4 balls they may help i have the bfast diff in mine also there is a AE cvd hop up so you can use the AE losi and other pin type wheels
Tom3012
06-06-2010, 07:38 PM
Just put some ceramic balls in and sand the diff plates, silky smooth if youd do that!
Youcan make B4 rims fit on the rear, you just have to space the axles properly
cragstar
06-06-2010, 09:17 PM
cheers people for the info
just one more question dose the B4 steering block fit as its for my son and would be great if they did then i could run B4 front wheels as i run one
Tom3012
06-06-2010, 11:04 PM
You have to drill it out ever so slightly to make it 3mm, ive done this myself, just because of all the B4 rims ive got ;)
zagonielod
07-06-2010, 07:40 AM
Or a B-Fast diff maybe :)
Has your B-fast diff arrived? And battle-axes?
kaylon
07-06-2010, 07:42 AM
Any 12mm hex 2.2 wheel will fit... several companies make them...
J
kedal
07-06-2010, 08:33 AM
Has your B-fast diff arrived? And battle-axes?
Not ordered yet :)
No money for the moment, plus, my bearing motor is dead, so I cant run for the moment :(
About rims, D4 hot bodies fits and are cheap !
zagonielod
07-06-2010, 11:10 AM
your EZrun 8,5 is dead? :(
My HSP motor is sick as well cas I had a race saturday and it get full with dust and sand :( Now I have to clean it out and dunno how.... It is not with screws. Maybe it cannot be opened.
What do you say guys, should I buy a used Novak GTB for about 90 euros?
kedal
07-06-2010, 11:37 AM
Well, the front ball bearing of my ezrun 8.5T motor is explosed :) Well, never ever cleaned it up, lot of run with it and 2 races so... maybe its normal...
I'm now thinking about 2 solution to replace it :
-I keep my ezrun ESC and buy a novak 8.5T ballistic
-I buy a Tekin RS with a redline 8.5T
I'm not sure what to do, but I really wnat that expensive tekin :)
Zago, for 90€ what you get ? Brand new ESC, used esc ? esc + motor combo ?
zagonielod
07-06-2010, 11:41 AM
Zago, for 90€ what you get ? Brand new ESC, used esc ? esc + motor combo ?
I get only a used ESC. And it is here, so no postage costs.
zagonielod
07-06-2010, 11:41 AM
hey kedal!.... did you rob a bank or what? :P
Tekin RS and redline 8,5? OUCH!!!!
kedal
07-06-2010, 01:19 PM
Seems to be a good price if the ESC is in good condition, brand new it's 150$...
Well, no, no bank robbery ;)
Just a wish... I dont know what to do... :)
ben44
07-06-2010, 02:17 PM
Kedal, I used Robitronic ESC (8.5) and motor (10.5) and they work very well.
They will do a new control card for the ESC.
Battle_axe
07-06-2010, 07:20 PM
my B fast diff is here i am rebuilding it as we speek it will be in the car for the oople race if anyone is there you should come give it a feel
zagonielod
07-06-2010, 07:36 PM
I think it would be much cheaper for me to buy one than to go to the UK and try out yours :P Even if I would :)
Tell us how it is when you try it out ;)
vBulletin® v3.8.7, Copyright ©2000-2025, vBulletin Solutions, Inc.