sparrowhalk xt brushless chassis

[rc_dan]

as above brought a thunder tiger xt, then added 5800kv dynamite fuse, ezrun esc, power hd dig servo... made this chassis & lipo holder up as didn't like the general layout and this one allows me to use 4000 11.v fightmax's

before:
http://www.hobbymedia.it/img/2009/03/thunder-tiger-sparrowhawk-xt-truggy-8.jpg

after: click to enlarge

http://i72.photobucket.com/albums/i163/dsm_lhf/th_10062010045.jpg (http://s72.photobucket.com/albums/i163/dsm_lhf/?action=view&current=10062010045.jpg)
http://i72.photobucket.com/albums/i163/dsm_lhf/th_10062010044.jpg (http://s72.photobucket.com/albums/i163/dsm_lhf/?action=view&current=10062010044.jpg)
http://i72.photobucket.com/albums/i163/dsm_lhf/th_10062010043.jpg (http://s72.photobucket.com/albums/i163/dsm_lhf/?action=view&current=10062010043.jpg)
http://i72.photobucket.com/albums/i163/dsm_lhf/th_10062010042.jpg (http://s72.photobucket.com/albums/i163/dsm_lhf/?action=view&current=10062010042.jpg)
http://i72.photobucket.com/albums/i163/dsm_lhf/th_10062010041.jpg (http://s72.photobucket.com/albums/i163/dsm_lhf/?action=view&current=10062010041.jpg)
http://i72.photobucket.com/albums/i163/dsm_lhf/th_04062010035.jpg (http://s72.photobucket.com/albums/i163/dsm_lhf/?action=view&current=04062010035.jpg)

[j.m.]

5800Kv on 3s? No way... That's more than 70,000 rpm unloaded on a full pack. Your motor WILL explode.



p.s.

It's Flightmax :)

Jon

[rc_dan]

64380... gets hot but not hot enuff too touch... on its limits tho

[j.m.]

4.2v per cell fully charged. Or 12.6v. 12.6x5800=73,080 rpm.:bored:

[rc_dan]

fair enuff... runs fine tho

[j.m.]

Huh....

Well, I guess just don't expect it to last that long. Make sure you lubricate your (motor) bearings frequently.

[rc_dan]

it doesn't even got too hot too touch... and ok cheers for the tip

[rc_dan]

http://www.rcpitstop.co.uk/dynamite-rc-fuze-brushless-motor-5800kv-dyn3736-202-p.asp

even on the specs its says it can handle 2/3 cell lipo