PDA

View Full Version : vintage belts from SDP

kaszal
02-09-2010, 11:20 AM
I bought some replacement rear belts for my Procat from www.sdp-si.com (http://www.sdp-si.com)

part No. A 6B16M071060

These are the same pitch (MXL) and nearly the same number of teeth (71 instead of 72) but a little wider (6mm instead of 5mm) and made in urethane with kevlar reinforcement. The tooth profile also looks a little different (new ones are grey). They only cost $3.34 for a pair.

Do you think these will be better, like the BRP orange front belt is better than the kit rubber belt?

http://i103.photobucket.com/albums/m134/kaszal/IMG_9785.jpg

http://i103.photobucket.com/albums/m134/kaszal/IMG_9782.jpg
isobarik
02-09-2010, 11:30 AM
Looks awsome try www.beltcorp.com they can provide belts and they can also cut them if you want to get the right width.

mvh isobarik
kaszal
03-09-2010, 06:14 AM
Unfortunately the 71 tooth belts are too tight when used with the pro-diff and narrow eccentrics. Back to the drawing board!
isobarik
03-09-2010, 06:25 AM
Unfortunately the 71 tooth belts are too tight when used with the pro-diff and narrow eccentrics. Back to the drawing board!

Check this one out then ...http://beltcorp.thomasnet.com/item/g-belts-neoprene-timing-belts-standard-pitch-belts/mxl-080-neoprene/72mxl?

could work....

mvh Isobarik
kaszal
03-09-2010, 07:06 AM
Thanks! Those are neoprene... aren't the urethane belts better?
slowjun
09-03-2011, 04:43 AM
will those belts also work for a YZ10 Fine pitch Front and rear Belts.

Sample pics.

http://i778.photobucket.com/albums/yy64/slow_jun/Yokebelts.jpg


wanted to have some spares so that i could run my runner. any links help will be appreciated.

Thanks Guys.
kaszal
04-04-2011, 01:39 PM
The MXL belts all seem to have a trapezoidal tooth profile (grey belt in the photo) but does anyone know what pitch are the "hi-torque" belts (black belt) with the rounder tooth profile?

http://i103.photobucket.com/albums/m134/kaszal/IMG_9785.jpg
isobarik
04-04-2011, 01:50 PM
will those belts also work for a YZ10 Fine pitch Front and rear Belts.

Sample pics.

http://i778.photobucket.com/albums/yy64/slow_jun/Yokebelts.jpg


wanted to have some spares so that i could run my runner. any links help will be appreciated.

Thanks Guys.

yokomo fine pitch belts are M2 pitch