Spurgear X4 Pro

[jmsjms]

Hello i need a smaller spurgear on my Ansmann X4 Pro buggy the stock one is 85 teeth 48dp any ideas where to get one??

[Dave Dodd]

At the moment Ansmann dont do any option part spur gears. :(

but as it closely resembles a bmax4 they might do one

[rob martin]

how much smaller u want to go?? u can modify the 80t from the 2wd buggy to fit.

[jmsjms]

I would like to go for 80 , but the spurgear from 2 wd cant fit, the slipperplates ar different size and the centerhole is much smaller in the 2 wd

[rob martin]

I would like to go for 80 , but the spurgear from 2 wd cant fit, the slipperplates ar different size and the centerhole is much smaller in the 2 wd

It will cause ive done it. U use the slipper pads from the 2wd and and u've to carefully drill out the hole to a bigger size to fit the 4wd plates. Its more work than i would like to switch spurs but if you really want a smaller spur its def possible.

[Dave Dodd]

does this look about right?

http://i463.photobucket.com/albums/qq351/doddy-1971/bmsg81.jpg

[nicefrog]

Nope that's nothing like it, I looked through all the slipper pads on ebay and couldn't see anything at all the same or similar in pattern. But I guess there would be quite a few that would fit if you use the spur and slipper, just need to find one with the same size hole. Anyway you can suggest it to tcmodels here to have one made and chances are they will do it :). So who votes? and what size? 80 tooth, everyone agrees?

[Dave Dodd]

thats form a yokomo bmax4 81t out of the champ kit thought it might have been the same..nevermind lol

[woOdy]

Why do you want to go smaller?

[nicefrog]

thats form a yokomo bmax4 81t out of the champ kit thought it might have been the same..nevermind lol

Yeah well the car looks roughly similar but judging by the spur it's vastly different in detail :). And now woody will say, the cars good enough for a national A main out of the box with the 85 tooth spur and so any new one is pointless right :)?

[Battle_axe]

Why do you want to go smaller?

I cant see why he would I have had everything from a 28 to a 17 pinion meshed in there I guess maybe running 13.5?

[jmsjms]

The reason is that im am running a 13,5 in a race serie in Danmark

[jmsjms]

Here is a picture of the stock spurgear from Ansmann

[Robbiejuk]

It will cause ive done it. U use the slipper pads from the 2wd and and u've to carefully drill out the hole to a bigger size to fit the 4wd plates. Its more work than i would like to switch spurs but if you really want a smaller spur its def possible.

Interesting, did you have to cut a slot for the pin to?