Suggitt
17-09-2007, 08:50 PM
I have for sale a Losi XX4 Worlds Edition with alloy motor clamp, and alloy servo mount, front and rear outdrive savers.
This car has done just under a season of racing indoor and out, so is in good nic.
Comes with the following spares New in Packet
Low CG Graphite chassis x1
Front Graphite shock tower x4
Rear graphite shock tower x2
Front graphite wish bones x3
Rear graphite wishbones x4
Side and front HP drive belt x4
Rear HP drive belt x2
Bulk Head x3
Rear hubs x1
Moulded outdrive packs x2
Rear wing mounts x1
Spindles and carriers x3
Battery hold down Straps x1
Front and rear bumper x1
diff screw hardwear x2
rear axel, washer, and pin x3
universal bearing cross rebuild x2
u joint pins x1
84 tooth spur x1
82 tooth spur x2
Extra rigid ball cups x1
slipper pad x1
Rear wings x3
And i also have the following which are open and used bit in great order.
2 rear wishbones with hubs, bearings and hinge pins for the hubs and wishbones.
2 complete diffs with bearings.
front wishbones fixed to bulk head with left spindle carrier and driveshaft.
Steering assembly with bearings and ball studs
2 rear braces
2 plastic servo mounts
1 rear toe in mount
2 rear drive shafts
3 wing mounts
motor mount plate
complete set of turn buckles and cups
different springs,
front, green, silver, orange and black,
rear, red, pink, and yellow
various other bits and bobs
Also included are 2 shells painted, a wing, and a set of used yellow mini spikes
Open to reasonable offers.
This car has done just under a season of racing indoor and out, so is in good nic.
Comes with the following spares New in Packet
Low CG Graphite chassis x1
Front Graphite shock tower x4
Rear graphite shock tower x2
Front graphite wish bones x3
Rear graphite wishbones x4
Side and front HP drive belt x4
Rear HP drive belt x2
Bulk Head x3
Rear hubs x1
Moulded outdrive packs x2
Rear wing mounts x1
Spindles and carriers x3
Battery hold down Straps x1
Front and rear bumper x1
diff screw hardwear x2
rear axel, washer, and pin x3
universal bearing cross rebuild x2
u joint pins x1
84 tooth spur x1
82 tooth spur x2
Extra rigid ball cups x1
slipper pad x1
Rear wings x3
And i also have the following which are open and used bit in great order.
2 rear wishbones with hubs, bearings and hinge pins for the hubs and wishbones.
2 complete diffs with bearings.
front wishbones fixed to bulk head with left spindle carrier and driveshaft.
Steering assembly with bearings and ball studs
2 rear braces
2 plastic servo mounts
1 rear toe in mount
2 rear drive shafts
3 wing mounts
motor mount plate
complete set of turn buckles and cups
different springs,
front, green, silver, orange and black,
rear, red, pink, and yellow
various other bits and bobs
Also included are 2 shells painted, a wing, and a set of used yellow mini spikes
Open to reasonable offers.