savox servo help on a b44

[alex.anderson]

i have a savox servo sc1567mg and am using the j arm in the kit and the thin spacer i have fired it up it steers fine but get a struggling noise from the servo at end of steeer both directions

[stegger]

Make sure you 've centered your servo and made sure all your TX settings are set to neutral before you put the servo horn on !!!! What your getting is probably the "end points" need setting. Look in your transmitter manual if you don't know how to do it. ;)

[alex.anderson]

thanks m8 will check this ive centre servo already that be me next step thankyou