New Novak motors

[super__dan]

http://www.teamnovak.com/products/brushless/velociti_lights/index.html

Hoorah, these are now unvailed. I've had a couple a while and they are proper good. Basically they are really smooth, almost exactly like a brushed motor. I still run the 6.5L nearly all of the time in my 2wd but find that the 5.5L is much more drivable in a 2wd where as any normal 5.5 is just plain bonkers.

I also like the blue :)

[josh_smaxx]

oooo, looking for new BL motor for a slippery track :)

[Richard Lowe]

Any idea on them getting into the shops?

The blue would go well in my BJ4 and it might be kinder to the tires (and gears :rolleyes:) than the 5.5R was at Batley ey' Dan?! :D

[andy05]

Dan do these motors still have enough punch for 4wd? i saw these on a us site the other day and tought they looked good. I have already got the novak velocity motors with the sintered rotos and ribbed can. They are very smooth my only complaint is the purple sleeve it dosent go to good with all the blue bits on my S4 and B4 problem now solved thanks novak:D

[Body Paint]

How on earth could you have kept that to yourself:wtf:

They do sound good though, eh

http://www.teamnovak.com/products/brushless/velociti_lights/index.html

Hoorah, these are now unvailed. I've had a couple a while and they are proper good. Basically they are really smooth, almost exactly like a brushed motor. I still run the 6.5L nearly all of the time in my 2wd but find that the 5.5L is much more drivable in a 2wd where as any normal 5.5 is just plain bonkers.

I also like the blue :)

[Cooper]

is that 13mm rotor usefull for offroad ?

[super__dan]

These aren't exactly slow, but they are really smooth I think better for 2wd buggy all round!

I would imagine it would work just fine in a 4wd. I imagine on a slippery floor or say a wet track it would give much better power delivery and on a high grip track just be that less violent on acceleration ;)

[andy05]

These aren't exactly slow, but they are really smooth I think better for 2wd buggy all round!

I would imagine it would work just fine in a 4wd. I imagine on a slippery floor or say a wet track it would give much better power delivery and on a high grip track just be that less violent on acceleration ;)

Probably suit my heavy right thumb then:rolleyes:

[Chrislong]

In 2wd or 4wd, they just have more feeling to them all together, less aggression, less suprises. Oh and considerably lighter (20g) so there is that too.

[mattym0310]

as rich sed above... any idea when these will be in the shops??

[super__dan]

That's something I have absolutley no idea about, sorry.

Trying getting your shop of choice to ask (hassle) CML, or contact CML yourself I guess.

[Chrislong]

Update. *News flash*
Popular UK model shops have the L-range motors in stock :D and CML have a good supply of them so no issue in getting them.

Im expecting these to be VERY popular, I can't stress how good they are.

So.... who has one already, let us know what you think.

Chris

[footey]

i was running a 6.5 in my bj4 at batley chris and liked it alot im gonna get a 5.5 to run in my 4wd and fit the 6.5 in my x6

[strobe]

Would the 'L' range motors work ok with an LRP brushless speedo

[Richard Lowe]

Yep they work no problem :cool:

[Chrislong]

Would the 'L' range motors work ok with an LRP brushless speedo

Like Rich say, yes no problem.. All Novak motors will work with any other brand of sensorred speedcontrol.

[Mike Hudson]

Great :D so which would be best for 2wd a 5.5 or 6.5?

[Richard Lowe]

I want to try a 5.5L for 2wd as the 6.5R has too much torque and not enough top speed for me in 2wd. I think Chris runs 5.5L in 2wd and Dan 6.5L?

[super__dan]

Oh Rich, you're sooooooo out of touch ;)

I was running a 6.5L but have now upped it to the 5.5L and it's just about perfect!

[Richard Lowe]

I knew Chris was man enough for the 5.5 but wasn't sure about you :p

[Chrislong]

I knew Chris was man enough for the 5.5 but wasn't sure about you :p

Ha ha, and your correct too. 5.5L in 2wd, everywhere, the throttle curve is smooooooth with a top speed to match the 5.5R - so driveability is awesome.

[Mike Hudson]

thanks guys :):D will be ordering a 5.5L then with an LRP comp 07, lots of blue :p cos blue is better ;)

[AndyM]

red is better :D

(nosram)

[Mike Hudson]

:o andy, Nosram = Nosgays :p

[AndyM]

haha, we're not gunna have another argument bout this are we scamp?:rolleyes::p

you know i'll win;):cool:

[Chrislong]

Please guys, this isn't the thread...

[AndyM]

the motors are brca legal arent they?

just double checking

[Chrislong]

http://www.brca.org/BRCA/elecboard/news/EB%2005%20Size%20Brushless%20Motors%20latest.doc

Here is the Homoligation List. The L-series is part of the Velocity brushless Novak motor range....

[mjp]

Never mind all this new stuff, get a 1994 Corally 15 x 2 in!

[RogerM]

It states purple sleeve for the Novaks .... would be a real pain to get turned away for having the wrong colour sleeve!!!

If CML are sending a hologation sample in I'm sure that will be listed for next year so no issues.

[ben]

i had a go with a new L motor in chris longs car at teesside and it was sooooooo smmooooooootttthhhhh. I think i will be getting me some. I like it a lot:D:D:D:D:D:D:eh?::eh?::eh?:

lil ben

[stegger]

could be a stupid question?:confused: but how do you connect the sensor cable to a novak BL motor??? is the connector block behind the motor cover??? I will be using an LRP sphere TC spec:D

[josh_smaxx]

The sensor lead is built in, its hard wired to the motor with a connector on the speedo end.

hth:)

[CraigM2610]

could anyone tell me wot pinion i should start on a 5.5L in my XXXCR?

mine arrived today and cant wait to use it :)

[PaulRotheram]

could be a stupid question?:confused: but how do you connect the sensor cable to a novak BL motor??? is the connector block behind the motor cover??? I will be using an LRP sphere TC spec:D

use the novak one to the LRP esc socket.

[Northy]

Remember the L series are not BRCA legal :rolleyes:

G

[super__dan]

yet!