schumacher hex diff washers

[brian s]

were the hex diff washers fitted to procat diffs made only to fit the procat(mms?) diff or were they common to other models?.

[MattW]

They came (Schumacher ones) after the procat was launched, but I think they were gone by the time the bosscat came. I suspect they would have been used in ( or at least would fit) the cougar. I think the cougar 2 had moved onto the same design as Bosscat.

Not sure if they were used in any other models.

[brian s]

the bosscat and cougar2 used the tri-lobe washers which schumacher still list. i`m looking to find some of the hex drive washers and seem to remember that they were fitted to something else ?.

[jeroen206]

http://cgi.ebay.com/SCHUMACHER-U1097Z-HEX-DIFFERENTIAL-WASHER-PK-2-NIB-/290472523922?pt=Radio_Control_Parts_Accessories&hash=item43a182f892

Here are some hex washers.

[brian s]

jeroen thanks for the reply,have just bought them.

[kaszal]

Hi Brian, I found out from Dangermouse on RC10Talk that the Losi hex washers LOSA3010 fit and are more hardwearing too.

[brian s]

hi kazal, thanks for the part number have just found some of them on ebay, will see if they fit when they arrive and let you know.cheers

[kaszal]

Hi Brian, I got mine already - they fit the Schumacher alloy diff halves well (maybe a tiny bit looser) and are about 0.18mm thicker.