Setup Speed Passion GT V2 Esc

[Anibal Henriques]

HI
Need good setup, especial in the item 11,12,13,14 AND 15 of the esc,for a 2wd RB5 and SP 8.5T V3 .
Can you help me?

Best
Anibal

[sosidge]

Personally speaking I don't think you should be using the supercharger software for 2wd mod. Use the 205MOD software instead.

If you think you can gain an advatage from using the supercharger on 528MOD, start out with mild settings. Bear in mind that the supercharger takes away a lot of the throttle feel that is so important in off-road.

[RogerM]

Absolutely do not use the supercharger settings .... the beauty of these ESCs is how smooth they are and the supercharger will destroy that feel!!!

For the other settings I will have to have a quick check on mine for you but I think off the top of my head it was the punch setting at 5 and timing at 8. The brake / neutral range settings are all personal preference but I have them all on the lowest settings.

Hope that helps.

[Anibal Henriques]

Thanks a lot ,now i understand the reason why the 8.5T motor SP V3 just melt the soldering off the gold bullet connectors from the wiring this past weekend in the MAg8 indoor.:blush:
Just fixed with a good solder iron ,the motor it is ok now.:thumbsup:

[RogerM]

What did you find was the cause?

The SP V3.0 motors like to be geared higher than most in my experience.

[Anibal Henriques]

What did you find was the cause?

The SP V3.0 motors like to be geared higher than most in my experience.

I think this happened doing to dinamic timing in the esc ,just geared with 78spur and 24 pinion ,thats not to much for this motor ,thats a litlle strange because i just clean the old solder with a 30watts iron and just melt very fast .The motor is very good ,and in the carpet without lastro makes a very smooth car .
Best
Anibal

[Alex_X6]

Guru Anibal, that motor is excelent! :drool:

and you konw, im in love by SP GT2:p