B4 Motor screws

[Nightshade]

Hi guys

I'm putting a B4 Ft together that I picked up off here. Didn't come with any screws to mount the motor. Can anyone tell me what screws I need? The manual lists them as 3mm, which I assume is the width, but no note on how long they should be. Any B4 guru's know?

Ta folks

[sparrow.2]

What you need are M3 screws with a hex head in about 8-10mm length.

Any model shop ought to be able to sell you some. Make sure you use washers as well or they will chew up the motor plate.

[Nightshade]

like so?
http://cgi.ebay.co.uk/M3-x-10mm-3-x-10-Black-Inner-Hex-Button-Socket-Screw-10-/250669115013?pt=UK_ToysGames_RadioControlled_JN&hash=item3a5d0b2685#ht_2261wt_905

[sparrow.2]

Those are button head screws. They will work although I prefer cap head screws as the hex is bigger and deeper.

These should do nicely:

http://cgi.ebay.co.uk/M3-x-8-Socket-Cap-Head-BOLTS-BLACK-12-9-20-/180572522664?pt=UK_DIY_Material_Nails_Fixing_MJ&hash=item2a0af608a8

[Nightshade]

Thankyou kindly