View Full Version : core rc code steering not centre'in
ch!3f
20-01-2011, 10:14 AM
hi guys as title ive had this problem for a while now but dont get to race much so for bashing its fine.has any1 had this issue can it be sorted or am i looking at a new radio set?
sosidge
20-01-2011, 10:32 AM
If you are certain it is the transmitter and not the steering setup in the car, then it is probably a loose pot in the transmitter.
I'm sure you can pop the back off the transmitter and check for damage/tighten up the screws.
If you think it is a warranty issue... ignore what I said about taking the back off and talk to your dealer.
Shaun 'TheSheep' Atkinson
20-01-2011, 11:09 AM
I have been using mine now for about 6 month and I haven't had any probe at all, I really can't fault it for the price. As above post suggests I would first off check the set up in the car. Have you took your servo out of the car and checked for play in the gears, its possible you could have lost a tooth near the central position.
ch!3f
20-01-2011, 12:08 PM
i bought it second hand already had the back off to remove the aux throttle hold switches ive just reset it and then again and its fine now stupid thing!lol
dont know why it was doing it it was doin it will all my servos will see haw it goes for now
vBulletin® v3.8.7, Copyright ©2000-2025, vBulletin Solutions, Inc.