dex410 set up

[paulywally]

can some one give me a bit of giudance on the best set up for polished wood floors as i carnt stop the back end kicking out (pengalim effect)when taking up drive out of the corners, unless i back the slipper right off

current set up is
35wt Front shocks stock blue springs
30wt Rear shocks light green springs
1200wt fFont diff
5000wt Rear diff
Rear weight set
21mm ride hight Front and Rear

[Northy]

Take the weight kit off.

G

[Spencer Mulcahy]

Is your servo saver tight?

[Big G]

shouldn't the front diff be tighter than the rear?

are you running standard pistons?

[Chris Doughty]

in low-grip, thin out your diff oils, try a 5k front and 2k rear

[James]

What wheelbase are you running?

try my setup from hereford indoors, it was pretty slippy there ! :

http://www.team-durango.com/pdf/setups/TD102001/Hereford%20(Indoors)_GB/DEX410_Hereford_MCC_BRCA_Indoor_Finals_James_Helli well_23_01_11.pdf

Heres my setup guide too which should help..

http://burninrubber.co.uk/#/setup-guide/4539947670

[mikeyscott]

What wheelbase are you running?

try my setup from hereford indoors, it was pretty slippy there ! :

http://www.team-durango.com/pdf/setups/TD102001/Hereford%20(Indoors)_GB/DEX410_Hereford_MCC_BRCA_Indoor_Finals_James_Helli well_23_01_11.pdf

Heres my setup guide too which should help..

http://burninrubber.co.uk/#/setup-guide/4539947670

link doesn't work for the guide

[James]

Just click on the link on the page it takes you to.

[Big G]

worked for me

yeah I swapped from 10k/5k to 7k/3k on slippy floor and it's working so far