8mm bulk head?

[reg]

Hi,does anyone know if there will be a new bulk head to fit into the front of the shell?

[bigred5765]

might be a shell instead me thinks

[reg]

nnnnnnnnnoooooooooooo:(..................£50 instead of £7:cry:........unless its a new design all together,and it looks wicked:thumbsup:

[jeffrey]

What is the problem?
Mine body and undertray fits the new 8mm longer chassis.
A little bit of modification and it fits good.
grtz

[bigred5765]

nnnnnnnnnoooooooooooo:(..................£50 instead of £7:cry:........unless its a new design all together,and it looks wicked:thumbsup:

there will be some nice new shells in the not to distant future,:thumbsup:

[Aran]

think maybe its more than just new shells coming out!

[jcb]

After fitting my chassis today I hope there's a new shell on the way as I don't want to have to do that again. Must admit I was surprised at how much material had to be removed!!

[reg]

What is the problem?
A little bit of modification and it fits good.


so does mine but do you fancy doing it everytime you snap one?

[gazhillAE]

I can do a front plate modded in 1 min for the 8mm chassis :woot:

Send me yours and il take £10 for the service per item!

Deal????

My address is......:p

[mikeyscott]

there will be some nice new shells in the not to distant future,:thumbsup:

When are we talking as I was going to get a new shell painted soon, but will hold if there is a new shell coming out.

I'm in no rush at the mo anyway as a) I haven't raced the SV since Petit and b) I'm on the standard chassis still

[bigred5765]

im in the process of making plugs for the new shells now, just need someone with vacform access,;)

[reg]

I can do a front plate modded in 1 min for the 8mm chassis :woot:

Send me yours and il take £10 for the service per item!

Deal????

My address is......:p

:woot:

[Adam F]

Just a quickie,

Why is everyone trimming the bulkhead and moving the shell backwards?

By just adding to the spacers on the rear body mount the shell can sit in its original position with the 8mm gap at the rear, which looks less noticable than the gap at the front imho...

There is not much form in the rear sides of the shell, so it still fits pretty well..

[jeffrey]

isn't your spurgear comming to the body ??

[Adam F]

Nope, 2mm clearance to an 83t spur..

I had trimmed the very rearmost part which covered the side of the spur as it was irritating trying to get the shell off..

[reg]

Just a quickie,

Why is everyone trimming the bulkhead and moving the shell backwards?

By just adding to the spacers on the rear body mount the shell can sit in its original position with the 8mm gap at the rear, which looks less noticable than the gap at the front imho...

There is not much form in the rear sides of the shell, so it still fits pretty well..


i didnt do it as it leaves all the rear open to all the crap that will get thrown up

[Adam F]

The gap isn't too bad as the majority of the gearbox is enclosed in that area and runs horizontally underneath the body so it doesn't leave much uncovered.

[reg]

The gap isn't too bad as the majority of the gearbox is enclosed in that area and runs horizontally underneath the body so it doesn't leave much uncovered.


i just wasnt happy having a gap at the back,plus it doesnt look as good:p