Machine Shops

[university_dave]

Guys,

I've designed some parts I need to get machined out of aluminium fairly quickly as part of a touring car chassis conversion I'm working on, unfortunately the chap who was making them has been struck down with a vicious illness so can't finish them off. Can anyone recommend anywhere that might be able to make these up within a fairly tight timescale? I need to get them on the car in the next fortnight so I can make sure they work with the carbon fibre chassis plate and top deck I've already had cut and am testing at the moment.

Thanks!!!

[Jamie.T]

P.M me with details or images as to roughly what your looking for and ill see if we can help out.

[Candyman]

...and if he cant help i'll have a look...

[university_dave]

If anyone wants to see what I need to have made have a look at;

http://www.akularacing.co.uk/akula-products/

There are some CAD screenshots of the three parts I need manufacturing along with some photos of the rest of the conversion.

If anyone can help either PM me or e-mail tom@akularacing.co.uk

[Joe_K]

Hi guys,

I'm looking for essentially the same thing as the OP.

I would like to get four parts made out of aluminium for a M-chassis conversion of my own design (2 for the motor mount/transmission housing, 2 for the rear suspension components). Everything else on the car is either original Tamiya parts or simple fibreglass plate.

Do you guys know of anyone who can offer such a service?

Cheers

Joe

(P.S. First time poster, bit nervous, etc etc :woot:)

[turbosimi]

you have a pm!