Can anyone help please

[markymark6183]

Right guys I bought a code 2.4ghz and the reciever wouldn't pick up a signal beyond 5 meters but everything worked perfectly I.e steering and throttle, I had delivered today a "etronix pulse ex2g" once I binded it the steering works but it won't pick up the esc "fusion exceed" !!! I've tried to reverse channel 2 but still no joy, it's really starting to get on my wick can anyone help please

[Robbiejuk]

Make sure you haven't hit the throttle kill switch on the transmitter. I think it is the toggle switch on the front right of the transmitter.

Best to way to test it is that is to swap the servo and speedo plugs around on the receiver. If you turn on the car try the throttle stick and see if the servo moves, if not then flick the toggle switch and try it again. When you get the servo moving with the throttle stick swap the plugs around again and hopefully it will be working again.

My dad has a core transmitter and I spent a whole club night trying to work out why his car wouldn't work despite it getting power to the servo. That switch was the culprit.

[markymark6183]

Just driven to wheelspin models ( who were fantastic ) they tried what you said and tried every trick in the book but the esc was just not responding so they just gave me a new motor and esc so got to rig it altogether later and fingers crossed it works :D