PDA

View Full Version : voltage boost


andyr
25-04-2011, 02:41 PM
as it say whats the best to use guys and where to get them from

truggy lover
25-04-2011, 02:56 PM
i used this one
http://www.rcdynamics.co.uk/
awsome small foot print and very easy to use

mates have used the novak one just as good as it does whats its meant to but larger footprint

there is also this one on ebay
http://cgi.ebay.co.uk/Voltage-Booster-Receiver-Servo-lets-u-run-1-cell-/330533614856?pt=UK_ToysGames_RadioControlled_JN&hash=item4cf556b508

but very flimsy mate had one to try but it flexed and broke at the first meeting

hope that helps

neil

Chequered Flag Racing
25-04-2011, 03:18 PM
i used this one
http://www.rcdynamics.co.uk/
awsome small foot print and very easy to use



+ one for the above.
wires could be softer though

or try this one
http://www.actionmodelcentre.com/proddetail.asp?prod=TQC%2DTQBOOSTER

got both and they work fine

Gazza
25-04-2011, 06:50 PM
I have tried three and all work fine the 3rd one is this and well cheap

http://cgi.ebay.co.uk/Voltage-Booster-BEC-lets-you-run-1-cell-Servo-ESC-/250796364269?_trksid=p5197.m263&_trkparms=algo%3DSIC%26itu%3DMRU-220%252BUCI%252BIA%252BUA%252BFICS%252BUFI%252BDDS IC%26otn%3D10%26pmod%3D220731242522%252B2508050531 23%26po%3DLWI%26ps%3D63%26clkid%3D8709929239200877 625

teamorsum96
25-04-2011, 07:52 PM
sorry to sound thick, what do these do?:confused:

and andy, do you think you need to go any faster lol cant beat first, can you?:thumbsup:

Chequered Flag Racing
25-04-2011, 08:03 PM
sorry to sound thick, what do these do?:confused:



RCDyanmics explanation

The voltage booster ensures that the model electronics are supplied with stable 6V supply throughout the duration of the run, regardless of input voltage. In 3.7V LiPo powered cars this means you are assured of reliable operation of all electronics, as well as constant servo speed throughout the run, without the need for, or the extra weight of the alternative separate receiver pack. In NiMH powered cars, whilst not normally a necessity, the steady 6V supply ensures glitch free operation of all electronics and constant servo speed. With many servos, response and feel is much better with a 6V supply than without the booster.

andyr
25-04-2011, 08:07 PM
its to run 1cell lipo mate

teamorsum96
25-04-2011, 08:27 PM
its to run 1cell lipo mate

i like your way of saying it, lol simple :D