View Full Version : B44 oneway diff

17-12-2007, 11:36 PM
Does any one know if there is, or will be one, or if any other oneway unit fits in the B44.

17-12-2007, 11:46 PM
www.M-K-racing.com (http://www.M-K-racing.com) has one in stock for the b44. http://www.m-k-racing.com/product_info.php?products_id=5110
Hope this helps

Mike Hudson
18-12-2007, 12:36 AM
associated ntc3 oneways should fit on the b44's

18-12-2007, 09:28 AM
Yeah the nitro tc3 one will fit. Same as the BJ4.

Now there is a refreshing change;)

18-12-2007, 12:42 PM
Thanks everyone for yor help.
Sly :)

26-12-2007, 08:21 PM
ok small question?!?! i have got one of the k-factory one ways. only thing is that a normal diff gear doesnt fit over the shaft. do i have to make the hole bigger and risk the fact that i will make the hole miss shaped and risk it being wonky on the shaft. or is there one alreays made that will work??

and if i had looked into it abit more there is a kyosho one way unit that is ready built for the b44

26-12-2007, 08:23 PM
There is already one made mike, its specifically for the NTC3 one way, the hole is bigger and the holes for the diff balls are in a slightly different location from what i remember.

They are not too much and should be able to get them at any CML stockist.

26-12-2007, 08:42 PM
does anyone have a specific part number please. im looking but i cant find the right one

26-12-2007, 09:20 PM
AS1732 i think is the right number, best to double check first online.

21-01-2008, 06:31 PM
so as long as it a bj4 or ntc3 it will fit

Mike Hudson
21-01-2008, 07:47 PM
yeah they are fine, yokomo have also made one specifically for the b44