Bradley@BMM
25-04-2011, 09:49 PM
Hi there guys, I am selling up all my electric kit as I am leaving the hobby in order to learn to drive. All the items for sale have been used for one meeting at roundabout raceway and are therefore in AS NEW condition. I only accept pay pal as payment and I am not interested in any swaps for obvious reasons
Item 2) 1.5/2/2.5mm EDS HEX DRIVERS have been used to build the kit, As new condition.
£15 posted
http://i865.photobucket.com/albums/ab219/boltonmodelmart/Leccy%20gear/100_1000.jpg
http://i865.photobucket.com/albums/ab219/boltonmodelmart/Leccy%20gear/100_0999.jpg
Item 3) SIGMA EQ2 LIPO CHARGER AND BALANCER with many other functions including NiMh, NiCad, LiFe and Lead acid batteries. This is again as new with the protective screen cover still on and has charged the saddle lipos once. This will come boxed and will be posted recorded delivery.
£48 posted
http://i865.photobucket.com/albums/ab219/boltonmodelmart/Leccy%20gear/100_0997.jpg
http://i865.photobucket.com/albums/ab219/boltonmodelmart/Leccy%20gear/100_0998.jpg
Item 4) ORCA INIFINITE LiPo 5200 Mah Hardcased saddle LiPo. These have been charged once as stated above and fit the losi 22 perfectly in the mid motor config. These Retail at £85 and come with the appropriate charge lead/balancing lead for charging.
£SOLD
http://i865.photobucket.com/albums/ab219/boltonmodelmart/Leccy%20gear/100_0993.jpg
http://i865.photobucket.com/albums/ab219/boltonmodelmart/Leccy%20gear/100_0995.jpg
Item 5) ORCA VRITA PRO 7.5t Brushless Speed Controller & Motor Combo. This Combo Retails at £197 And has been used at one race meeting. It comes with the ESC programming card to program timing etc and sensor lead for the motor. It will come boxed in the original packaging and is a VERY quick combo. It is suitable for all 1/10th vehicles.
Specs:
- Multiple Adjustable Parameters : 12 Parameters
- Adjustable Drive Frequencies : Yes
- Motor Limited : Over 5.5T
- Motor Type : 540 Size Sensored / Sensorless
- Voltage Input : 4.8V-9.9V DC
4-6 cells NiMH / NiCD
2 cells LiPo / 2-3 cells LiFe
- Dimensions : 42(L) x 33.5(W) x 33.5(H)mm with Fan Attached
- Weight : 65g (With out Wires)
http://i865.photobucket.com/albums/ab219/boltonmodelmart/Leccy%20gear/100_0985.jpg
http://i865.photobucket.com/albums/ab219/boltonmodelmart/Leccy%20gear/100_0977.jpg
£SOLD (You will not be disappointed)
Item 6) Savox 1251 Low profile servo. This Accompanies the car well as it allows space at the front end to mount the receiver and personal transponder. Nice but of kit and picture is included in the picture of the losi 22.
SOLD
If Anybody is willing to take this lot off me as a job lot I can do the whole 2WD set up for £450 posted (£488 on its own). You would not be disappointed and would be an ideal start into the racing scene.
Kind Regards, Bradley@BoltonModelMart
Item 2) 1.5/2/2.5mm EDS HEX DRIVERS have been used to build the kit, As new condition.
£15 posted
http://i865.photobucket.com/albums/ab219/boltonmodelmart/Leccy%20gear/100_1000.jpg
http://i865.photobucket.com/albums/ab219/boltonmodelmart/Leccy%20gear/100_0999.jpg
Item 3) SIGMA EQ2 LIPO CHARGER AND BALANCER with many other functions including NiMh, NiCad, LiFe and Lead acid batteries. This is again as new with the protective screen cover still on and has charged the saddle lipos once. This will come boxed and will be posted recorded delivery.
£48 posted
http://i865.photobucket.com/albums/ab219/boltonmodelmart/Leccy%20gear/100_0997.jpg
http://i865.photobucket.com/albums/ab219/boltonmodelmart/Leccy%20gear/100_0998.jpg
Item 4) ORCA INIFINITE LiPo 5200 Mah Hardcased saddle LiPo. These have been charged once as stated above and fit the losi 22 perfectly in the mid motor config. These Retail at £85 and come with the appropriate charge lead/balancing lead for charging.
£SOLD
http://i865.photobucket.com/albums/ab219/boltonmodelmart/Leccy%20gear/100_0993.jpg
http://i865.photobucket.com/albums/ab219/boltonmodelmart/Leccy%20gear/100_0995.jpg
Item 5) ORCA VRITA PRO 7.5t Brushless Speed Controller & Motor Combo. This Combo Retails at £197 And has been used at one race meeting. It comes with the ESC programming card to program timing etc and sensor lead for the motor. It will come boxed in the original packaging and is a VERY quick combo. It is suitable for all 1/10th vehicles.
Specs:
- Multiple Adjustable Parameters : 12 Parameters
- Adjustable Drive Frequencies : Yes
- Motor Limited : Over 5.5T
- Motor Type : 540 Size Sensored / Sensorless
- Voltage Input : 4.8V-9.9V DC
4-6 cells NiMH / NiCD
2 cells LiPo / 2-3 cells LiFe
- Dimensions : 42(L) x 33.5(W) x 33.5(H)mm with Fan Attached
- Weight : 65g (With out Wires)
http://i865.photobucket.com/albums/ab219/boltonmodelmart/Leccy%20gear/100_0985.jpg
http://i865.photobucket.com/albums/ab219/boltonmodelmart/Leccy%20gear/100_0977.jpg
£SOLD (You will not be disappointed)
Item 6) Savox 1251 Low profile servo. This Accompanies the car well as it allows space at the front end to mount the receiver and personal transponder. Nice but of kit and picture is included in the picture of the losi 22.
SOLD
If Anybody is willing to take this lot off me as a job lot I can do the whole 2WD set up for £450 posted (£488 on its own). You would not be disappointed and would be an ideal start into the racing scene.
Kind Regards, Bradley@BoltonModelMart