Log in

View Full Version : HW/Xerun esc Q


OneKiwi
03-05-2011, 05:33 AM
getting another esc and wondering about these 2
I love the look of the xtreme stock bbut its 60A
Will both the 120 xerun (http://www.giantcod.co.uk/xerun120asd-brushless-p-405854.html) and 60a HW xtreme stock (http://www.racersinexile.org.uk/Hobbywing_Xtreme_Stock_ESC_-_INTERNATIONAL_-_BLACK/p446090_1757837.aspx)run a 6.5/7.5 in a 2wd well? Is the fan needed?
This may be a flogged horse but I can't find the exact answer yet

Mb3195
03-05-2011, 06:52 AM
you will be able to use down to 5.5t non-boosted with the xtreme, have got one ordered myself!

the are both the same esc, it just depends what software you have installed. with what you are running id recommend the xerun 120 though.

hth.

mark

Kusal
03-05-2011, 09:32 AM
I am running an Xtreme stock in my Durango with a Novak Ballistic 7.5
I am using the 205MOD (non boosted) software and the temp of the speedo is not going higher then 48°C!
Make sure that you put the timing on full (if not, motor and speedo will heat up an extra 10°C).
In the future I am going to start experimenting with advanced timing without the turbo to see what the advantages are.
Greetz.