PDA

View Full Version : X2 or X pro setup for grass


ben44
03-05-2011, 09:44 AM
Dear all,

I have a national race the 14&15 / 05.
The track was in grass, i never drive on grass and i would like to have a good start setup.
I can use the big bore, or the normal one.
On the big bore my piston are at 1.2 Mm (I just have he spring sell with them but i would buy the other quikly) I can change them if you prefert 1.4 mm on the rear (because i thinks is better on grass), on the normal one i have all the kyosho piston too with all the ansmann spring + light yellow front and rear kyosho and sliver front kyosho.
For the car i thinks have all the option :thumbsup:

Please help me

Ben

ben44
04-05-2011, 10:20 AM
nobody can help me :cry:

marcel
04-05-2011, 10:37 AM
i run almost same setup as astroturf.
25wt rear 35wt front.soft spring f+r 1.2mm pistons bigbore shocks.

ben44
04-05-2011, 11:41 AM
Ok, i will try

nosequehacer
04-05-2011, 06:17 PM
i run almost same setup as astroturf.
25wt rear 35wt front.soft spring f+r 1.2mm pistons bigbore shocks.

How about camber link and shock position ? washer here and there?

Thank you Marcel

marcel
04-05-2011, 06:58 PM
hello

rear camberlink
inner link,outer lower hole
outer link,outer hole with 2.75 mm shim on alu hub
+1mm alu hub
shocks inner hole on arm and tower .

front link inner and outer hole/longest ,1 mm shim on inner link
30deg c hubs
front shocks innner on arm and midle on shock tower.
ackermann on rear hole. no bumpsteer spacers.
dith i forgot something?:woot:

nosequehacer
05-05-2011, 05:24 AM
dith i forgot something?:woot:

I donīt think so :lol:

Thank you so much Marcel :thumbsup: