stinky mardaves!

[Garry Spice]

at maritime raceway last night i had a hpi saturn motor melt down on me and this isnt the first! and b+h racing also lost a motor after 3 laps of practice.:confused:
now,we are both using hara twister esc and 50c lipos which is no different to everyone else there.

are these motors a bit pooey?:thumbdown: is there a alternative?:thumbsup: and we cant use brushless!

[ch!3f]

has the hpi saturn got an internal fan?and are you running a heat sink?maybe worth buying a good heat sink to distribute the heat from the motor.

these motors arnt ment to be used with such high currents hence why they melt so need more care to keep them cool.

[B&H Racing]

I`m running 40c Lipo and have an old XX4 Heatsink bolted on the end of the motor and a heatsink accross the top of the motor.

Motor went on me after 3 laps.

Seized solid

Not really enough time to get hot !!!

[ch!3f]

was that the 1st time you had used it?old damage to the motor from previous use can come loose and seize it in just 3 laps if plastic melts or with the heat metal parts move out of place and the next time you use it a slight knock can move them and end result is whats happened!

[B&H Racing]

Brand New out of the packet.

And yes it is the one with the fan.

I think each of the problems were probably caused from the fan coming loose.

[qatmix]

I was always under the assumption that you shouldn't really use any lipo over 20 or 25 c with closed endbell brushed motors (Or any brushed for that matter). I just bought some ultra cheap 5000 20c lipo of ebay and have been running G2's on them with no ill effects.

[B&H Racing]

Looks like the problem is likely to be the lipos then.

To be honest we have only just started running this class, been running Brushless and Lipos previously.

Cheapy Lipos here we come.

[ch!3f]

could try turning your esc down so its not throwing too much juice at the motor!

[B&H Racing]

I`m running all my good esc's in my offroad cars.

Just running a Speedmaster v60 or an old hara twister in the Mardave.

Hopefully using some old lipos should cure the problem.

Cheers

[stevemardave]

im have had the saturn motor in mine since carpet wars finished and bean using 20c and 25c lipo the motor gets very hot but keeps working at maritme ok :woot: steve.d

[Garry Spice]

thanks steve, yep its looking like our 50c lipos are killing them we think! oh well 2 weeks to fix it!

[Gazza]

dont get me started on brushed motors LOL :lol::lol:

[teamorsum96]

dont get me started on brushed motors LOL :lol::lol:

is that because you cant keep them running smoothly lol

[ch!3f]

is that because you cant keep them running smoothly lol

dont get me started on brushed motors LOL :lol::lol:

SPEEEEEED

[teamorsum96]

SPEEEEEED

ooo i no the brushless as speeeeeeed :lol: i run a brushless micro at the same meeting a run a mardave, and after running micro i think my mardave does't have any punch lol

[beckybean66]

ooo i no the brushless as speeeeeeed :lol: i run a brushless micro at the same meeting a run a mardave, and after running micro i think my mardave does't have any punch lol

but to be honest your buggy is a beast, its well fast, i remember the time you was racing and i was like 'wow crazy speed' (not knowing it was only half throttle) after race you then went down main straight FULL THROTTLE :o:woot: NIIIIIICE lol

[Garry Spice]

had similar problem last tuesday night.....running my mardave in heat 2 (and failing to finish every run tho) then running back to the pits ripping out my pt and re-sticking back into my 12th in heat 3.....now a 10.5 brushless 12th makes a 20t brushed mardave look crap!

[teamorsum96]

had similar problem last tuesday night.....running my mardave in heat 2 (and failing to finish every run tho) then running back to the pits ripping out my pt and re-sticking back into my 12th in heat 3.....now a 10.5 brushless 12th makes a 20t brushed mardave look crap!

lol i bet it does, i rememeber running a 17d motor in 1 on 4 cells and that was quick.

and becky i no :D cant beat abit of power :drool::lol:

[beckybean66]

hope i can handle the power seeing as im gonna be having a go, sorry in advance for breaking it or taking out a childs face LOL :lol:

[teamorsum96]

hope i can handle the power seeing as im gonna be having a go, sorry in advance for breaking it or taking out a childs face LOL :lol:


:lol::thumbsup: