next question

[turbo_brick]

Got my car nearly setup just having a problem with the rear stepping out as you come on the power after a corner, this is on the slippy floor part of the track (although that is most of the track :o) my setup on the back at present is

0 degree camber
3 degree per side toe in
22mm ride height
5.5 turn spring
50 wt oil
kit piston
middle hole on rocker

any help or suggestions appreciated

peter

[Northy]

Add some more toe-in, soften the oil a little.

Are there many jumps? What tyres are you using?

G

[turbo_brick]

Yes there's a few jumps and i'm using mini spikes.

peter

[Northy]

BIG jumps?

Spikes suit the Pred better than pins.

Try what I suggested, let me know how it goes.

G

[turbo_brick]

Went down to 40 wt oil and added 0.5 degree of camber, totally different car to drive, went so much better.

cheers for the help

peter

[Lowie]

Could you also share your setup for the front section?
Thx :)

[Northy]

Went down to 40 wt oil and added 0.5 degree of camber, totally different car to drive, went so much better.

cheers for the help

peter

No problemo.

G

[turbo_brick]

Could you also share your setup for the front section?
Thx :)

at the minute on the front i've got

1 degree toe out
0 degree camber
30wt oil
kit piston
6.5 turn spring
castor 0 washers behind upper arm
16mm ride height