Advice needed

[Fast Eddie]

Hi
I have a B4 with a mamba max pro speedo and Ezrun 5.5. The speedo is sensored and the motor is not.
It seems very jerky when moving off without much initial control.
Would I be better with a different motor? I am a bit of a novice so control is needed:thumbsup:

[watfordtrackwarrior]

hi m8 was running the same motor in my b4 was basicly undrivable i was using the ezrun speedo on the lowest punch level but the motor has way too much torc and you cant get rid of it you can make it slower but you cant get rid of the torc i would not recomment a sensorless motor in a 2wd drive get your self a sensored motor or run a low wind brushed set up much more drivable you can actually use the power with the brushed hope this helps just my opinion from experiance dont take as 100% gospel:thumbsup:

[damselfly]

I have that speedo in one of my cars, it's seriously heavy duty for a little buggy.
Imo a sensored 10.5 or something around that ballpark would be a better option for you.
I use a sensored Fusion exceed 10.5 in my Mad Rat which is of similar size and it is absolutely ideal.
Lots of fun to drive, very fast, and handles like a dream.