Clicking noise under heavy breaking

[thorny97]

Good morning everyone

I am very new to electric cars, normally race nitro cars.

Anyway the problem i have is with my SX3, under heavy breaking there seems to be a clicking noise coming from the spur and the pinion. Is this normal? If not what could be the problem?

thank you

[ulrich]

Good morning everyone

I am very new to electric cars, normally race nitro cars.

Anyway the problem i have is with my SX3, under heavy breaking there seems to be a clicking noise coming from the spur and the pinion. Is this normal? If not what could be the problem?

thank you

If spur is not damaged.. I don´t believe it is the spur/pinion. Have you checked belt tension? front or mid belt can do some noise if they are set to loose.

[thorny97]

Just built it has per instructions, only seen the track for 10 minutes

[TonyV2382]

sounds like belts skipping...If it were ur spur/pinion ud hear a screaching noise from the spur being to tight or something like that....I have noticed that the front belt is set a tad looser as per the instructions...maybe tighten that up a bit but in general...check your belts for any wear and adjust as needed. The manual shows how to tighten/loosen them. Tighten them up just a bit at a time and test.

[thorny97]

sounds like belts skipping...If it were ur spur/pinion ud hear a screaching noise from the spur being to tight or something like that....I have noticed that the front belt is set a tad looser as per the instructions...maybe tighten that up a bit but in general...check your belts for any wear and adjust as needed. The manual shows how to tighten/loosen them. Tighten them up just a bit at a time and test.

Thanks for the advice, i will try that