Kamtec or Team bluegroove?

[gainsy]

Going to get a new shell for my Cat xls
Both the above traders on ebay do them
Has anyone used them before? & what is the quality of their shells?
Kamtec - http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=310195748627&ssPageName=STRK:MEWAX:IT
Team Bluegroove - http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=150607718302&ssPageName=STRK:MEWAX:IT

[Welshy40]

Ask dave belsten as he has a kamtec one for his procat but kamtec are quality and thicker material than the originals so will last longer

[gaza121]

:thumbsup:Go for Kamtec, I have had a few shells of Keith and he is a top bloke too!!!

[CAT3K]

Both have pros and cons, if you need the wing then the Kamtec shell does not come with one, but the TBG shell does. And if you need the undertray then the Kamtec shell comes with one, where the TBG one you need to buy seperately.

I've found both to be fine when it comes to quality :)

[gainsy]

Thanks guys :thumbsup:
Will give the Kamtec 1 a go

[brian s]

i`ve had shells from both and quality wise kamtec shells are better than the bluegroove ones.
i found that on the bluegroove shells the lexan thickness varies quite a lot and can be very thin in places,great for shelf queens but not so good for racing.

[kaszal]

Does anyone have the Kamtec Procat shell?

Does it fit with the undertray OK?

[brian s]

the yellow/green car has an original schumacher shell, red/yellow car has a kamtec shell and the other two are blue groove shells,they all fit the undertray ok.


http://i466.photobucket.com/albums/rr24/brianspooner/DSCF0922.jpg

[kaszal]

Thanks. I like the squarer front end on the Kamtec.

btw I like your cars :thumbsup:

With four you could start your own Procat racing club :lol:

[QuackingPlums]

Is the Kamtec also slightly wider at the back too, like the old Racecraft shells?

[terry.sc]

Is the Kamtec also slightly wider at the back too, like the old Racecraft shells?
It is the old Racecraft shell they have taken the mould from, as you can tell by the extra air scoops moulded either side of the cockpit to make it different enough so Racecraft could sell the body without being done for copying.

The Bluegroove shell is taken from the proper Schumacher Procat body.

[QuackingPlums]

I thought it looked familiar! The Racecraft shells were thicker than stock back in the day too!

[brian s]

what happened to racecraft ?.

[gainsy]

Kamtec shell just arrived, looks very good quality & at only £24 posted for a shell & undertray it's good value as well
Pics here
http://www.oople.com/forums/showthread.php?t=75512

[Welshy40]

Keith makes quality stuff at an affordable price. He may be slow in making the molds but now you know why it took so long.

[peetbee]

what happened to racecraft ?.
Still in business but they mould stuff for play equipment, etc and have no plans to go back into the RC shell making business.

I got in touch with them approx 18 months ago to enquire whether they still had the moulds for the old Optima Mid shell that they used to do.

[gainsy]

Glad i checked the shell before i drew the design on the outside, no protective film on it

[gainsy]

Here's the Kamtec shell done in box art style, all ready to be posted off to his new owner

[mikeyscott]

Kamtec shell just arrived, looks very good quality & at only £24 posted for a shell & undertray it's good value as well
Pics here
http://www.oople.com/forums/showthread.php?t=75512

Nice, yet they've still got my XXCR Kinwald shell I sent them ONE YEAR ago, don't respond to emails, don't reply to squat.

:mad:

[gainsy]

Nice, yet they've still got my XXCR Kinwald shell I sent them ONE YEAR ago, don't respond to emails, don't reply to squat.

:mad:

Yeah i have heard many a story about Kamtec never getting back to people, he must be about though as i got my shell 1 day after paying for it :o

[MOGGIE XL]

I sent Keith my Topcat shell about four years ago and he still hasn't done the mould.He said he would send the shell back but I still haven't got it.
Not a good way to do business.

[mikeyscott]

I sent Keith my Topcat shell about four years ago and he still hasn't done the mould.He said he would send the shell back but I still haven't got it.
Not a good way to do business.

Great :thumbdown:

Time for another email, I don't want him to do a mould I just want the shell back. If no shell a lot of money for it as it was NIP and I haven't seen an original since.

[liam]

Nice, yet they've still got my XXCR Kinwald shell I sent them ONE YEAR ago, don't respond to emails, don't reply to squat.

:mad:


but will respond to a gentle knock on the door :lol:

[superdez]

I sent Kamtec two Yokomo shells in 2009. I have not been contacted since. Kieth if your reading this, you are a shyster.