PDA

View Full Version : X10 Diffs in a mitchum 98?


Robbiejuk
21-01-2008, 10:53 PM
A firend of mine has mitchum 98 pred and he was wondering if the metal diffs from the later versions will fit into it? Also what other bits would fit his cars such as rockers etc.

burgie
22-01-2008, 09:29 AM
the later diffs will fit, but you will need new bearings and the new alloy diff holders. You will also need to dremel some of the chassis away to. you will see where when you put the diff in.

everythign else will fit as long as you are prepared to do some mods here and there. may be easier to leave the mitcham as a shelf queen, if it is original, and buy a 2nd hand X10. it could well work out cheaper.

The mitcham, with it's black anodising and black wheels is by far the best looking pred yet!

franki
22-01-2008, 10:47 AM
the later diffs will fit, but you will need new bearings and the new alloy diff holders. You will also need to dremel some of the chassis away to. you will see where when you put the diff in.

everythign else will fit as long as you are prepared to do some mods here and there. may be easier to leave the mitcham as a shelf queen, if it is original, and buy a 2nd hand X10. it could well work out cheaper.

The mitcham, with it's black anodising and black wheels is by far the best looking pred yet!


It was until the X11 came out!!!!!:D

Robbiejuk
23-01-2008, 08:19 PM
Cheers guys I will tell him the bad news, although knowing him he will go to the trouble of doing all that was stated above.

Cooper
23-01-2008, 08:30 PM
buy an XRS you can find them even cheaper :p

franki
23-01-2008, 09:57 PM
Yes you can and i have a very nice one avalable!!!!