cant stop wont stop

[bad man alty]

I have no brakes on my car and realy dont know why. The program card has no affect and it is the correct card for the speedo. Please advise. Thanx

[Col]

What speedo?
What motor?
What car?
What surface have you tried it on?
All info needed to help.

[bad man alty]

B 44 hobbywing ezrun 60a sl. Ezrun 5.5 6000kv. Astro turf. No brakes on any surface tho mate

[Dazzler]

Transmitter settings? Brake travel / EPA? Something to look at.

[bodgit]

You're overloading the speedo. The 5.5 motor your running is too much off road. You should be running 8.5 max according to hobbywings specs. Hopefully you might not have damaged the speedo.

Output: Continuous current 60A, burst current 380A.
Input: 4-9 cells NiMH/NiCd or 2-3 cells LiPo.
<-Motor Supported: Sensorless Brushless Motor
Suitable Brushless Motor:
http://www.hobbywing.com/sign.jpg With 4-6 cells NiMH/NiCd or 2 cells Lipo: On-Road≥5.5T, Off-Road≥8.5T;
http://www.hobbywing.com/sign.jpg With 6-9 cells NiMH/NiCd or 3 cells Lipo: On-Road≥8.5T, Off-Road≥13T;
Suitable Car: 1/12, 1/10 on-road or off-road cars / trucks for normal race or sportful race.
Size: 31.5mm(L) * 27.5mm(W) * 24mm(H).
Weight: 32g(Without wires)

[RogerM]

That is too much motor for ANY 60A esc.

The other thing to check is that you have the reverse force turned up to 100% .... that effects the total available braking too!!!!

[ghostdogg]

Try programing the speedo to the receiver!
It might work

Oli

[bad man alty]

Thanx people il have to get a new motor speedo combo me thinks. Im runin un sensord anyway