maky
10-09-2011, 01:10 PM
atomic carbon cr2
very high spec
ex nathan waters car before he got the durango 2wd prototype
4 gear g-rc gearbox
red carbon chassis(usual off road wear underneath)
lunsford titanium turnbuckles all round with losi white ball cups
alloy rear pivot block
losi threaded shocks with tapered pistons , black and pink springs (dont leak)
fitted with the better xxx rear end but parts in the spares to fit xxx-cr rear end
rare 1 deg rear hubs fitted
rude bits brass battery straps + single carbon straps + full carbon battery plate i made(not great but it works )
rude bits under servo brass weight
rude bits brass under motor plate and the little brass square for the middle
rude bits brass front chassis weights inc but not fitted
brass front bulkhead
associated alloy servo mounts
unobtanium hinge-pins throughout
diff fitted with new ceramic diff balls and new thrust bearing 1 meeting old
2 piece extra droop front shock tower
lots of spares inc drive shafts , wishbones , spare diff, hubs , shock towers, braces, spurs, pivot blocks, steering rack + more
15 sets good front tires inc ballistics , greens , yellows, 3 sets stagger ribs and 5 sets of rims
rear wheel fitment is standard pin fitting
pics are here --- https://picasaweb.google.com/107135777084509766001/Cr2?authuser=0&authkey=Gv1sRgCP3xwqb0lYfgtgE&feat=directlink
looking for £170 posted next day with ups
only selling due to new sponsorship with durango
very high spec
ex nathan waters car before he got the durango 2wd prototype
4 gear g-rc gearbox
red carbon chassis(usual off road wear underneath)
lunsford titanium turnbuckles all round with losi white ball cups
alloy rear pivot block
losi threaded shocks with tapered pistons , black and pink springs (dont leak)
fitted with the better xxx rear end but parts in the spares to fit xxx-cr rear end
rare 1 deg rear hubs fitted
rude bits brass battery straps + single carbon straps + full carbon battery plate i made(not great but it works )
rude bits under servo brass weight
rude bits brass under motor plate and the little brass square for the middle
rude bits brass front chassis weights inc but not fitted
brass front bulkhead
associated alloy servo mounts
unobtanium hinge-pins throughout
diff fitted with new ceramic diff balls and new thrust bearing 1 meeting old
2 piece extra droop front shock tower
lots of spares inc drive shafts , wishbones , spare diff, hubs , shock towers, braces, spurs, pivot blocks, steering rack + more
15 sets good front tires inc ballistics , greens , yellows, 3 sets stagger ribs and 5 sets of rims
rear wheel fitment is standard pin fitting
pics are here --- https://picasaweb.google.com/107135777084509766001/Cr2?authuser=0&authkey=Gv1sRgCP3xwqb0lYfgtgE&feat=directlink
looking for £170 posted next day with ups
only selling due to new sponsorship with durango