PDA

View Full Version : Wheels!


ghostdogg
20-09-2011, 03:38 PM
What other wheels can fit on a Durango 1/10th apart from the TD wheels?
Oli
:thumbsup:

Big G
20-09-2011, 04:11 PM
any pretty much.

it has pins in the rear - 12mm hex in the front

coleman758
20-09-2011, 04:28 PM
B44 wheels fit, but the offset on the rear is different i believe.

craigosh
20-09-2011, 04:39 PM
I found the B44 wheels make the car slightly narrower all round. Makes the front wheels cut into the ball cups a little at full lock. But otherwise fit fine.

hloland
20-09-2011, 08:52 PM
Hexes in the front is not 12mm though. They are an imperial sized hex, ca 9,8mm. Kyosho, touring cars, Ansmann are using 12mm Hex`s. The new V3 uses 14mm Hex`s for the wheels.