PDA

View Full Version : shim & e clip


jaffacake
04-10-2011, 06:09 PM
THE NIGHTMARE CONTINUES!!!!!!!!!

Attempted to remove the outdrive from the diff case on my 410 today to replace the useless x seals with losi items after my diffs lost all there oil ,only to find what i had been expecting..the diff gear locked solid on to the outdrive, so following team durango's advice the only thing i could do was rest the diff case on an impact socket & tap the end of the outdrive,which yes has enabled me to remove the diff gear but in doing so has destroyed the shim & e clip
After checking je spares durango spares stock,the above are not even listed
Anywhere else does durango spares?

bally
04-10-2011, 06:17 PM
Hi, we have them in stock at MB models.

E-Clips
www.rccarshop.co.uk/index.php/spares/team-durango/dex410/e-clips-for-diff-4mm-i-d-10pcs.html
Shim
www.rccarshop.co.uk/index.php/spares/team-durango/dex410/shim-5x10x0-8-10pcs.html

Regards
Bally

stegger
04-10-2011, 06:22 PM
And here fella !

http://www.rossmod.co.uk/index.html

jaffacake
04-10-2011, 06:46 PM
Thanks stegger & bally
Ordered from mb models,had to..free postage,no brainer
Thanks again guys.

bender
05-10-2011, 01:45 AM
Sand down the hex on the outdrives so that the gear slips on and off easily. My ones were so tight that no method anyone offered on the internet would get them off. With the outdrives sanded they slide off easily now with a couple of firm taps of the case against the bench