Heatsink has come unstuck from my esc

[Crazy L]

So what sticks it back down again? I have a Fusion Exceed running a 6.5 motor and today aftera heat at Torch, I found the heatsink just sittng there, loose, atop my esc.

Can anyone possibly tell me what they use to stick em down with? At first I thought it was similar to processor paste in a computer, but im assured by an electronics guys that that stuff doesnt harden like what is on the Esc.

Muchos gracias in advance chaps

[mattr]

I had exactly the same problem, now fixed. I'll cut and paste the text from the manufacturer later on, but I just super glued it (they recommended something specific). It's been ok for the last 4 or 5 months.

[bigred5765]

heat sink epoxy, search ebay or rs

[fidspeed]

LRP and Nosram specify a special 3M heat transfer tape if i remember correctly check out any lrp destructions i'm sure its on their

hope this helps
dave

[mattr]

"Hi,


Sorry for my delay, ref earlier phone conversation.

The heat sink is bonded on to the esc unit with a white epoxy glue.

Great that the customer has re-glued the heat sink, I believe this will be fine. However if the heat sink comes off again or if any problem develops with the unit we are happy to inspect it under warranty. "