PDA

View Full Version : I want to play vintage


Body Paint
18-10-2011, 07:17 AM
Hi folks, I'm on the scrounge again,
After seeing Caines car last week I have got the bug and I want to build one. I need a donor car or parts.

I would like to take it one step further and use a T2 chassis but depends what I can get for the right money.

I am going to use a few B4 and modern parts to use B4 wheels so most of the suspension, driveshafts hubs etc.

So i need all the chassis, suspension mounts, gearbox and bulkheads from a rc10t T2 or some Gt parts are useable

What you got ? :-)

peetbee
18-10-2011, 07:47 AM
Blimey after all the stick Axeman got for wanting to run a car released in late 93, you want to use a chassis not released until 1995 and replace the suspension with B4 parts!
Brave man! :D:lol::woot:

axeman
18-10-2011, 12:01 PM
Wait for the poll.

Body Paint
18-10-2011, 12:33 PM
Blimey after all the stick Axeman got for wanting to run a car released in late 93, you want to use a chassis not released until 1995 and replace the suspension with B4 parts!
Brave man! :D:lol::woot:

Wrong Pete...

Will have RC10 Worlds wishbones (circa 1994)

T2 chassis (circa 1995)

RC10T front kickup, steering, towers, bulkheads, wishbone hangers, (circa 1991)

Stealth Transmision. (1992, 94 or 95 depending on version)

RC10 shell, wing and mounts. (1992 for Champs Edition)

New parts will be wheels, axles f & r, hub carriers f & r, and driveshafts. (circa 2003)

Screw set from RC10GT (date unknown)

PETE: Would you like to average that lot out and see what year that makes the car? LOL

Maybe I'll go embarass the modern 2wd's instead of cutting every other corner in the "stuck in the past" race :p:lol:

It might not have a T2 chassis yet anyway, depends what I can find...


Come on then, what's people got I can buy, swap, deal ???

peetbee
18-10-2011, 12:46 PM
Ah that's different, when I read your first post it implied you were after a T2 to run with B4 wishbones on!!

TBH I reckon it'll be easier & cheaper to buy a complete RC10T and then sell the parts you don't need
Have you checked out RC10Talk.com for parts?

Body Paint
18-10-2011, 12:53 PM
Anyway Axeman your Cat is from 1998.. don't you start :mad: :woot::wub

Body Paint
18-10-2011, 12:58 PM
Ah that's different, when I read your first post it implied you were after a T2 to run with B4 wishbones on!!

TBH I reckon it'll be easier & cheaper to buy a complete RC10T and then sell the parts you don't need
Have you checked out RC10Talk.com for parts?

I want to build something very similar to Caines car, if you didn't see it you really need to. That's where the inspiration came from then I read RC10Talk and now I really want one LOL

Can't see the for sale section on RC10talk.

Have found all the stuff I need on 1 ebay shop but he wants way more than I am prepared to spend. For just the parts excluding wishbones it would be well over 100 plus shipping.

peetbee
18-10-2011, 01:21 PM
I haven't seen Phil's car, but I know the one you mean:wub
I thought it used the 10T chassis not the T2 tho, I'm probably wrong.
With RC10Talk you have to have a certain number of posts before you can see the trade section - I can post a wanted ad for you if you like?

axeman
18-10-2011, 03:39 PM
It's a 1993 car with upgrades:p

mrspeedy
18-10-2011, 05:39 PM
I want to build something very similar to Caines car, if you didn't see it you really need to. That's where the inspiration came from then I read RC10Talk and now I really want one LOL

Got a link ? sounds interesting ....

Balders
18-10-2011, 06:11 PM
In short he'd built one of these..

And it was lush!

:)

http://i139.photobucket.com/albums/q309/waxnvx31/NV-X%202012%20VONATS%20Builds/09-17-20115.jpg

Caine
18-10-2011, 09:10 PM
I'm glad you like my car guys:thumbsup: i too got bit by the bug when i saw one!

I agree with pete the best way to go is get a 10T from ebay theres a uk one on there atm, however in the states for a donor truck you'll be looking to pay bout 30-40 quid which will give you a very very good base to start. I thnk people have gone down the T2 route and have achieved results but i think it has been a long job with a lot of modding.
As you said you can grab all the seperate parts, but the dealers on ebay break cheap runners and sell them at a stupid price.

Something like this would be perfect

http://www.ebay.com/itm/Vintage-Team-Associated-RC10T-Truck-Parts-/250910800988?pt=LH_DefaultDomain_0&hash=item3a6b72fc5c

Alot of the sellers dont advertise selling to the uk, but in my experience after a nice message they they normally will.

If you get a donor truck anything you dont use i'll buy of you anyway, i'm a sucker for vintage associated:wub

Caine
18-10-2011, 09:21 PM
Thats a very good likeness to mine Balders

But here she is.

I've done a few more bits to her since, electrics are in,wheels and tyres are bought, shell is trimmed. Just waiting on some spray mask so i can paint:)

Also Balders i cant wait to see your creation as well.

millzy
18-10-2011, 09:34 PM
so what is it?? truck or buggy. looks really nice but im confused as to its class/type

peetbee
18-10-2011, 09:56 PM
It's a buggy Chris, someone's repro'd the worlds wishbones which gives it a wider track than the standard RC10 - they were super narrow and always rattled around in the scrutineering box!

mrspeedy
18-10-2011, 10:08 PM
What if someone had a genuine worlds chassis they were looking to sell ?

millzy
18-10-2011, 10:09 PM
When I had my worlds and graphite it was for bashing in the street.....what was i thinking

Caine
18-10-2011, 10:18 PM
Looks nice yes, but as they say looks are definatley not everything! I just hope it goes well or more to the point, i can drive it well. Which is questionable!

It was built for this vintage season, so i'm pretty sure it'll have a fair few battle scars by the end of it! (mostly from being lapped i fear!)

Gonna be fun:thumbsup:

Body Paint
18-10-2011, 10:29 PM
What if someone had a genuine worlds chassis they were looking to sell ?

You coming over Friday? Maybe we could talk, would like to wrap my calumets around it at least :)

Caine: you out to play Friday, I need another fix lol

GRIFF55
18-10-2011, 10:31 PM
That looks real nice! I Always wanted a team ed rc10 ( i know its not)but can't ever remember owning one:cry:

jaysllim
18-10-2011, 11:05 PM
Sorry to say this but the tank im buying is alot less pretty but was around at the same time but not as technically advanced as the rc10 so when i get the purchase of my......... Is sorted ill bring up the club nd join in the fun untill then the blank will remain blank because im very jelouse of all these gorgeus rc10's about

Balders
18-10-2011, 11:40 PM
Thats a very good likeness to mine Balders

But here she is.

I've done a few more bits to her since, electrics are in,wheels and tyres are bought, shell is trimmed. Just waiting on some spray mask so i can paint:)

Also Balders i cant wait to see your creation as well.

:wub

Oww its a thing of beauty.. :thumbsup:

Mine is so far behind that its silly, I've got so much to do to even get close to the polished example you've put together there mate. :cry:

Phil I think you should forget your Losi and just run this all the time.. :)

At this rate we may just need one heat dedicated to RC10s...

MHeadling
19-10-2011, 09:33 AM
Caine, thats awesome! :thumbsup:

More pics please!

Balders
19-10-2011, 10:08 AM
Mine so far looks like this.. lots more to do though...

https://lh6.googleusercontent.com/-CXOR5YG3pZc/Tp6go0kYphI/AAAAAAAAA2w/KCHCw0__-5Y/s640/IMG_0465.JPG

RC10 worlds chassis, gearbox and rear wishbones
Durango Rear drivshafts
Tamiya rear hubs
RC10T rear shock tower
B44 rear shocks front and rear
RC10T truck nose, shock tower and steering
Traxxas TRX3 front wishbones
Tamiya TRF201 front castor blocks and steering arms.

chris-on-wheels
19-10-2011, 10:17 AM
29048
29049
29050
29051

THIS IS THE CHRIS-ON-WHEELS ENTRY :D

janus_77
19-10-2011, 11:26 AM
Here is mine converted for B4/X6 wheels :thumbsup:

Body Paint
19-10-2011, 12:08 PM
Here is mine converted for B4/X6 wheels :thumbsup:

I saw that on RC10talk, didn't realise it was yours.

Having personally been spanked by it I know how well it works aswell.

You are my inspiration Yanus :thumbsup:

Balders
19-10-2011, 12:17 PM
Here is mine converted for B4/X6 wheels :thumbsup:

are those Schumacher rear arms?

janus_77
19-10-2011, 12:48 PM
are those Schumacher rear arms?

Losi VLA Arms - with the outer hole cut away
Losi VLA Truck hubs - inner hole cut away
B4 axles - it works but a bit short, B4.1 units should be better.

You need to grind the axle spacers a bit, otherwise you're just a bit to wide with this configuration

Edit: found the parts list:


Rear:
- Losi 'CR VLA arms, cut away "long hole"
- Losi XXXT VLA hubs, cut away "short hole"
- B4 axles ( but like I said, B4.1 should be a bit better
- Stealth tranny
- Fibre-lyte shocktower
- B4 rear shock

Front:
- Fibre-lyte shocktower
- B4 20 deg hubs, drilled to make hingepin fit
( 20 deg is "-5" on a B4, so its actually a 25 deg on a RC10)
- T4 inline axles

Balders
19-10-2011, 03:15 PM
Losi VLA Arms - with the outer hole cut away
Losi VLA Truck hubs - inner hole cut away
B4 axles - it works but a bit short, B4.1 units should be better.

You need to grind the axle spacers a bit, otherwise you're just a bit to wide with this configuration

Nice one thanks.. :)

I've not got anything Losi on the car.. :) will do soon though as I was looking for something to give me a little more width at the rear.. :cry:

janus_77
19-10-2011, 04:45 PM
I've not got anything Losi on the car.. :) will do soon though as I was looking for something to give me a little more width at the rear.. :cry:

I just went to a hobbyshop with a caliper, to see what should work. Since I wanted easy access off the shelf items. But...........

There is still the Dynotech option

http://dynotech-racing.com/

http://dynotech-racing.com/photos/2700.jpg

http://dynotech-racing.com/photos/2701.jpg


Which can get you a car like this (robbed of Brandon G on RC10 talk)

Chassis parts

Truck nose plate
Nose brace tubes
Team car chassis
Graphite braces
RC10 battery cup
Associated bearing steering bellcranks
Protech body
RC10 wide wing
All countersunk holes countersunk more for no protruding screw heads.

Front

Dynotech front suspension arms
Proline B4 front wheel
RPM "Worlds" front shock tower
RC10T front bulkhead
RPM front bumper
RC10 caster block 25 degree
Inline steering blocks
RC10GT extended inline axles
Lunsford Ti turnbuckles
RC10 1.02" shocks, 30wt, brown springs

Rear

Dynotech rear suspension arms
Proline B4 rear wheel
Rear B4 MIP CVD
RC10 hinge blocks 1.5 degree
RPM RC10GT rear hubs
RC12 wing mounts
RC10T rear shock tower
RC10 1.32" shocks, 30wt, green springs
RPM worlds bulkhead

Transmission

2.25:1 Stealth tranny
27t/81t pinion/spur
RPM gear cover

jaysllim
19-10-2011, 04:57 PM
got to admit tha is a nice looking rc10 cant wait to get my.......... so i can start racing it against all these rc10 prob have my bum kicked but owell lol

Caine
19-10-2011, 08:02 PM
29048
29049
29050
29051

THIS IS THE CHRIS-ON-WHEELS ENTRY :D


Hmm, That car look slightly familiar:)

I'll get some more pics of mine up when it's complete, hopefully by the end of next week i wanna give it a test run. I'm sure you dont want to see all the little shots of every stage of the build that i took!

Balders, looking good there fella! Would love to have a worlds chassis on mine, but my proper worlds car is my winter project so my milled chassis is staying where it is!

Lastly Craig, not this friday dude next week, hopefully you'll be able to have a go on it then:thumbsup:

mrspeedy
19-10-2011, 10:07 PM
So the point of all these mods is to emulate the original RPM long arm then ??

Balders
19-10-2011, 10:40 PM
So the point of all these mods is to emulate the original RPM long arm then ??

because it looks freakin awesome maannn!!

Sorry I've been watching Top Gear USA

Body Paint
20-10-2011, 11:34 AM
So the point of all these mods is to emulate the original RPM long arm then ??

What Mikey means is that he has no earthly idea so if he make a big bold statement maybe you'll forget what the original question was... very American Mike LOL.

Si: I have been trying to find out the same thing.

From what I have read they are "the same as Worlds" not sure if that means they are the same as AE wide track wishbones (as fitted to the Worlds car) or if they are the same as the RPMwishbones or if in fact the RPM and the AE wide track wishbones are the same.

Really need a RC10 boffin involved at this point.

Any idea CAINE? JANUS? Anyone?

peetbee
20-10-2011, 11:51 AM
My understanding was that it was as close as you could get to creating this geometry
http://www.oople.com/forums/picture.php?albumid=218&pictureid=4473
or this
http://www.oople.com/forums/picture.php?albumid=218&pictureid=4474
but I could be wrong!

Northy
20-10-2011, 11:54 AM
What's with the trend for truck based cars? If you use a truck nose do they not end up longer? Don't the truck shock towers cock up the shock angles?

peetbee
20-10-2011, 11:57 AM
G, I think the wheelbase ends up pretty much the same as they redrill the mounting holes, the truck shock tower is used with wider track front wishbones so the lower mounting is further out than with the standard buggy width.

Balders
20-10-2011, 12:15 PM
What's with the trend for truck based cars? If you use a truck nose do they not end up longer? Don't the truck shock towers cock up the shock angles?

With the truck nose the car ends up the same length as our modern day 2wds (its about 8-10mm longer than standard rc10), you can re-drill the nose plate to bring the length back to the original RC10 spec but then if you are widening the wheelbase front and back a little extra length never hurt anyone...

Most people run the RPM worlds front tower which is slightly lower not the truck front tower, I don't have an RPM tower yet so left the truck one on for now.

http://www.bbc.co.uk/iplayer/episode/b0160z3t/Top_Gear_USA_Episode_1/ - it reminded me of Top Gear about 2-3 years ago when the films still seemed a little un scripted and they look like they are having a laugh.. They are already on season 2 in the states and they do get better as they all gel. Jumping a Cadalac Coupe was funny! http://www.youtube.com/watch?v=fRaSVHqc49E&feature=related

janus_77
20-10-2011, 12:27 PM
What Mikey means is that he has no earthly idea so if he make a big bold statement maybe you'll forget what the original question was... very American Mike LOL.

Si: I have been trying to find out the same thing.

From what I have read they are "the same as Worlds" not sure if that means they are the same as AE wide track wishbones (as fitted to the Worlds car) or if they are the same as the RPMwishbones or if in fact the RPM and the AE wide track wishbones are the same.

Really need a RC10 boffin involved at this point.

Any idea CAINE? JANUS? Anyone?

As far as I Know............

But check RC10talk, all the proper RC10 boffin / nut-jobs are located there :thumbsup:

The Dynotech arms are the same config. as the long (!) RPM arms. Normal length RPM arms are still easy enough to find. But the long ones are pretty rare by now.

Narrow: original AE RC10 arms
Normal: AE Team Car / Worlds car + RPM RC10 arms
Long: AE "prototype arms"* + RPM Long arms + Dynotech + Cut Losi VLA
Really long: RC10T arms, but you need to make special bulkheads / rearplates to make that work. (And it drives like shit, so don't bother.... )

* good luck finding these :D

Northy
20-10-2011, 12:31 PM
Oh no, I can see yet another project on the horizon.... :woot:

Northy
20-10-2011, 12:34 PM
http://www.oople.com/forums/picture.php?albumid=218&pictureid=4474
but I could be wrong!

Would I be right in thinking that's an RPM RC10 chassis etc and that they are pretty rare? :confused: If so it;s a good job you don't know where my mum lives..... shit, another project/restoration! :woot:

peetbee
20-10-2011, 12:57 PM
Would I be right in thinking that's an RPM RC10 chassis etc and that they are pretty rare? :confused: If so it;s a good job you don't know where my mum lives..... shit, another project/restoration! :woot:

no no no, they're really common, no one wants them as they are rubbish.
I'll do you a favour and take it off your hands ;)

Balders
20-10-2011, 01:11 PM
no not rare at all, RPM still make them.... I'll give you 40 quid though if want to get rid to make space.. ;)

mrspeedy
20-10-2011, 03:27 PM
If I remember right.... RPM made the conversion kits after the world championships where AE had the full custom RC10 Stealth cars so that we mere mortals could drive a car very similar .....

and they worked very well, particularly on dirt with a Hydradrive ...

Mines in the loft .... anyone want a look ? :woot:

peetbee
20-10-2011, 03:37 PM
see, I told you they were common and undesirable, well must be if they are all stored in lofts!
Bring it along Si:thumbsup:

Caine
20-10-2011, 03:40 PM
Would love to see it Si :thumbsup:

Was bidding on a full Rpm Truck on the bay a month or so ago and got outbid! It sucks when auctions finish at 3am our time.:(

Looks like we've started something here, theres a few people getting hooked already!

wax
20-10-2011, 04:19 PM
In short he'd built one of these..

And it was lush!

:)

http://i139.photobucket.com/albums/q309/waxnvx31/NV-X%202012%20VONATS%20Builds/09-17-20115.jpg

:thumbsup: This car should be completed soon :thumbsup:

Caine
20-10-2011, 04:24 PM
With the rear arms, as the dynotech arms are the same length as the rpm worlds, by using them on the standard chassis your giving a lot more rear end width as well. Apparently on the RPM ultra chassis the rear end was narrower making the width the same when you used the longer arms, also in the conversion kit there was a template to cut down the width on the back of the tub. If that makes sense:confused:

With the car having these arms front and rear they say it is the same footprint as a B4 or near enough.

janus_77
20-10-2011, 04:31 PM
Apparently on the RPM ultra chassis the rear end was narrower making the width the same when you used the longer arms, also in the conversion kit there was a template to cut down the width on the back of the tub.

True, but now you can just mount them on the normal position and just use you normal "flatdish" B4/X6 wheels instead of the older "deepdish" RC10 wheels. It's just a real plus if you have a B4 / X6 / Cougar / ...... , you can just use tires/wheels you have left from your normal race car.

All you need is longer drive shafts ( B4 / B4.1 )

Body Paint
20-10-2011, 10:29 PM
This is all starting to make sense now, I think I get it :)

Thanks Janus and Caine I knew guys would have the answers

I will be putting in an order with Dynotech soon, have already spoken to them and the have stock.

WAX: is that your car? And was that your first post on oople? Nice one :-)

Last question then, I still don't get why you would run 1.02 shocks on the front. As you would likely need a custom front tower anyway cos rpm worlds tower is so rare, why not get one made to fit say B4 length shocks?

Ps. I used to have an RPM car, no idea where that went Doh!

wax
21-10-2011, 12:11 AM
WAX: is that your car? And was that your first post on oople? Nice one :-)



Yes, Thats one of two im building for next years VONATS here in the states, I have had an account on oople for a wile but never used it lol :D

Body Paint
21-10-2011, 07:02 AM
Yes, Thats one of two im building for next years VONATS here in the states, I have had an account on oople for a wile but never used it lol :D

It's almost a crime to race something that beautiful but fair play to you for not hiding it in a cupboard.

We need to get some action shots of these cars just to prove they are not shelf queens Lmfao :)

Is there a VONATS website or anything? Would love to see them on track but it might be a bit of a long trip to pop over to watch lol

janus_77
21-10-2011, 07:13 AM
http://www.youtube.com/watch?v=wiMVtWzKLeo

http://www.youtube.com/watch?v=Q-fNTHT_Ve0

Northy
21-10-2011, 08:18 AM
This is my racer that I need to get going again :D

http://www.rc10talk.com/viewtopic.php?f=35&t=3183&hilit=regional+a+final&start=60

janus_77
21-10-2011, 11:21 AM
Last question then, I still don't get why you would run 1.02 shocks on the front. As you would likely need a custom front tower anyway cos rpm worlds tower is so rare, why not get one made to fit say B4 length shocks?

Dont think you had all the different shock sizes back then, so if the short ones had to little length to work with the longer arms you HAD to use the long stuff.

But now just use B4 / Losi front shocks and have Jonathan make a shocktower to work with that. ;)

peetbee
21-10-2011, 11:30 AM
Last question then, I still don't get why you would run 1.02 shocks on the front. As you would likely need a custom front tower anyway cos rpm worlds tower is so rare, why not get one made to fit say B4 length shocks?

Fibrelyte still do the RPM tower if you wanted, but I'm sure you'd be able to arrange a tower for different shocks easily enough!

Body Paint
21-10-2011, 11:35 AM
Dont think you had all the different shock sizes back then, so if the short ones had to little lenght to work with the longer arms you HAD to use the long stuff.

But now just use B4 / Losi front shocks and have Jonathan make a shocktower to work with that. ;)

good answer ;) Thanks again.

Exactly what I was plannin to do :thumbsup:

wax
21-10-2011, 11:42 AM
It's almost a crime to race something that beautiful but fair play to you for not hiding it in a cupboard.

We need to get some action shots of these cars just to prove they are not shelf queens Lmfao :)

Is there a VONATS website or anything? Would love to see them on track but it might be a bit of a long trip to pop over to watch lol

The car posted on this thread might be a shelf car, its built from all new parts, The second car im building has a little use, The chassis should be back today or tomorrow from having some machining done and some custom wing tubes, nose tubes and battery tubes.

VONATS FB Account http://www.facebook.com/pages/2011-Car-Action-Vintage-Offroad-Nationals/175929292449725

Website for the 2001 track http://www.rchr.biz/

2011 rc10talk thread (with Pics) http://www.rc10talk.com/viewtopic.php?f=48&t=19864

Body Paint
21-10-2011, 12:02 PM
http://www.youtube.com/watch?v=wiMVtWzKLeo

http://www.youtube.com/watch?v=Q-fNTHT_Ve0

That's ace! That's your car in the second video, yes? I especailly like the wheelie down the main straight :D

janus_77
21-10-2011, 07:13 PM
That's ace! That's your car in the second video, yes? I especailly like the wheelie down the main straight :D

Yeah that was me...., did use the 5.5 a bit to much here and there :rolleyes:
My car is also in the 1st vid but driven by a TFB driver. But it was a good event, if the Tamiya Wild One had a sub 37 sec. lap every other car had to stop and applaud before being allowed to continue. Naturally Chaos ensued :thumbsup:

mrspeedy
21-10-2011, 07:40 PM
After much rummaging around in the loft I've found all the RPM bits for the re-build :thumbsup: tho I can't find any shocks that fit other than a set of Losi shocks, and long ones both front and rear .... looks very retro !!! should have it done for next meeting ....

I really hate the Viper shell tho .... anyone want to buy ? its pink/ baby blue drip style and only used one meeting ..... looks cool but I want a Protech :thumbsup:

peetbee
21-10-2011, 08:45 PM
Ace, look forward to seeing it soon Si:thumbsup:

Caine
21-10-2011, 09:14 PM
Might have to bring myself a bib along so i dont drool all over it Si:wub
I will get one, one day!

mrspeedy
23-10-2011, 06:45 PM
Just seen this on ebay - http://www.ebay.co.uk/itm/RARE-Vintage-RPM-Chassis-Arms-Team-Associated-RC10T-Stadium-Truck-RC10-T-/130590955190?pt=Radio_Control_Parts_Accessories&hash=item1e67d3d6b6#ht_500wt_1258

peetbee
23-10-2011, 07:02 PM
Why did you have to tell everyone about it Si?!!
Can't see it going within my budget tho

Caine
23-10-2011, 07:15 PM
Yeah i had the heads up on this one as well
If i bought this my missus would crucify me!

Teaboy
24-10-2011, 05:23 AM
Having now had a complete change of plan for the vintage series (top secret) i have a spare RC10 graphite complete but not the best if anyone is looking for a cheap vintage car.

Cheers

Rich

Body Paint
24-10-2011, 01:08 PM
Why did you have to tell everyone about it Si?!!
Can't see it going within my budget tho

I think we were all watching that and not telling each other LOL

It's getting ruthless this vinatage stuff LMFAO

peetbee
24-10-2011, 01:24 PM
And that's just off the track!:woot:

Caine
27-10-2011, 03:59 PM
So did anyone bag that chassis?
Shame i didnt have the cash went for a good price.

wax
28-10-2011, 11:01 PM
Sooo.. Has anybody started building an old new RC10? Here is were im at on one of my builds, Notice i like Axial Green lol

http://i139.photobucket.com/albums/q309/waxnvx31/NV-X%202012%20VONATS%20Builds/10-28-1181.jpg

jaysllim
28-10-2011, 11:17 PM
im in the middle of making my rc10 hunter just really need a gd day with my leg so i can get on with a couple of hours wrk into it

Caine
29-10-2011, 08:17 AM
Yep mines finished and ran it for the first time last night, and i like it! Bit light on the front thou so i need some weight but apart from that:thumbsup:

Body Paint
29-10-2011, 09:03 PM
WAX that looks amazing! Not a green fan myself, I noticed the green screws in the last pic. Ive only just started collecting rc10 bits but I should hopefully be well on the way soon. Loving the polished edges to all the chassis parts and the cut down nose looks neat. Definitely giving me some inspiration.

Ps caines car looked awesome Friday, has spurred me on to get it done

Martyn Spooner
02-11-2011, 07:57 PM
Damn those Rc10s look amazing.
Want one.

Good job Caine and Wax.

I can't be bothered to take a photo - anyway my XX looks identical to this one:

http://www.rc10talk.com/viewtopic.php?f=27&t=18991&start=45

Caine
02-11-2011, 08:02 PM
Cheers for the comment:thumbsup:
Mine will never be as clean as that XX, be nice to see one running! infact it always good to see someone that isnt scared to run a new car, exactly as gaz did last year. No point them being sat there to look at.

mrspeedy
20-11-2011, 11:01 PM
Thought I'd ask you guys first ... I'm selling my worlds chassis, it's never been used outside and is pretty clean, the sides have been trimmed down a little to lower the bodyshell other than that its stock ...

I'm open to quality offers but not asking the moon for it so if your interested let me know :thumbsup:

peetbee
20-11-2011, 11:04 PM
is that the one you ran at the last round?

mrspeedy
21-11-2011, 12:54 PM
Nope, that was the modded version with the longer arms.

This is the Worlds version, all uncut and original :thumbsup: just the chassis mind and not inc the nose piece or chassis tubes ....