spindles69
22-10-2011, 08:13 PM
Just thought i would show the modifications that i have done to the scte truck.Mainly to shave a bit of weight from it.And to help in the weight balance of truck.
Moved moter 10mm further inboard.By mounting on an ally plate and utilising some of the chassis holes to make secure.
Lipo now sits on its side in an alloy tray.
Cut down the reciever box and mounted the rx on top of center diff housing.
Also side pods have been taken off.Replaced by a modified coke bottle to stop dust intrusion.
Had to move front brace over 10mm to clear front driveshaft.
Trying tommorow will let know how it performs.
29172
29173
Will try to upload pics again tommorow.
Moved moter 10mm further inboard.By mounting on an ally plate and utilising some of the chassis holes to make secure.
Lipo now sits on its side in an alloy tray.
Cut down the reciever box and mounted the rx on top of center diff housing.
Also side pods have been taken off.Replaced by a modified coke bottle to stop dust intrusion.
Had to move front brace over 10mm to clear front driveshaft.
Trying tommorow will let know how it performs.
29172
29173
Will try to upload pics again tommorow.