What connectors for motor to ESC

[dobber]

Im being really indecisive about what bullet connector to get to make a interchangable system. Im going to put connectors on the motor leads so i can mix motors easily without having to desolder and solder.

What connectors have you guys used?

For info
Currently running a Hobbywing 120a v2.1 esc and 6.5t motor

Thanks!

[Dazzler]

I've used the 3.5mm corraly style connectors and have found them to be fine.

Have a look here,

http://www.giantcod.co.uk/gold-bullet-connectors-pairs-p-405126.html

I put the male connector directly on the motor tabs, and the tubes on to the wires from the speed controller. Heat shrinking the exposed areas when in the connected state.