PDA

View Full Version : Viper VTX10R - Setups

samd
10-12-2011, 07:01 PM
Please post yours! Mainly with boost:)
Darren Boyle
10-12-2011, 10:23 PM
What motor and type of set up are you using (off road/on road - 2wd/4wd?)
Timee80
10-12-2011, 11:48 PM
i know he runs 4wd offroad with an lrp x12 8.5t octa wind motor
samd
11-12-2011, 09:18 PM
Ran today on a small half slippy, half carpet sport hall.

A19

0% drag brake/0% dynamic brake
Brake strength 95%
Brake PWM 8000Hz

No boost/top speed timing (blinky stock mode)
Punch 70%
Forward power 100%
Throttle PWN 9600Hz

LRP octa wind 8.5 as Tim says, geared 8.6/1 in a durango 410

Very happy, smooth and easy to drive, nice brakes with enough power for the small track.

Motor and speedo temps around 130/140degF

Looking forward to trying some boost profiles on larger tracks.
samd
18-12-2011, 07:28 PM
Setup for a large track half slippy but not too bad, half carpet sport hall.

A19

0% drag brake/0% dynamic brake
Brake strength 90%
Brake PWM 8000Hz

Start RPM 8000
End RPM 24000
Max acc timing 10deg

Skew rate 5deg/1000rpm
Max top speed timing 5deg
Punch 90%
Forward power 100%
Throttle PWN 9600Hz

LRP octa wind 8.5 , geared 8.6/1 in a durango 410

Again easy to drive, enough top end and power for the long straight, just.

Speedo temps around 140deg
Motor temps around 160deg