danmurphy
12-12-2011, 07:13 AM
http://www.ebay.co.uk/itm/330656016941?ssP...9#ht_759wt_1139 (http://www.ebay.co.uk/itm/330656016941?ssPageName=STRK:MESELX:IT&_trksid=p3984.m1555.l2649#ht_759wt_1139)
http://i1109.photobucket.com/albums/h431/danielmurphy1978/RC%20stuff/IMAG0270.jpg
http://i1109.photobucket.com/albums/h431/danielmurphy1978/RC%20stuff/IMAG0274.jpg
http://i1109.photobucket.com/albums/h431/danielmurphy1978/RC%20stuff/IMAG0271.jpg
Selling my BRCA National Spec 1/16th 4wd Micro racer
Car comes with many spares and hop-ups :
Inolab 261 Metal gear servo 0.06sec/60deg
Speed Passion 6900kv motor
EZ-Run 25A sensorless ESC
2 x CustomBlitz painted Phat Bodies Bolt shells
2 x Duratrax Vendetta SC chassis (LWB) 190mm spec
Big Bore Losi Mini LST Red Alloy threaded shocks
Big Bore graphite shock towers front and rear
Titanium turnbuckles
Alloy wheel hexes
Stainless Steel Hex head screw set
CVD driveshafts front and rear
Roll bar sets front and rear
Many spares including wishbones, drive shafts, springs, arms, gears, bearings and hardware.
I will include a set of Schumacher pins or rally blocks on scale saloon wheels as shown
You will require transmitter, reciever and small size 2s lipos (upto 85mm long) to run/race
http://i1109.photobucket.com/albums/h431/danielmurphy1978/RC%20stuff/IMAG0270.jpg
http://i1109.photobucket.com/albums/h431/danielmurphy1978/RC%20stuff/IMAG0274.jpg
http://i1109.photobucket.com/albums/h431/danielmurphy1978/RC%20stuff/IMAG0271.jpg
Selling my BRCA National Spec 1/16th 4wd Micro racer
Car comes with many spares and hop-ups :
Inolab 261 Metal gear servo 0.06sec/60deg
Speed Passion 6900kv motor
EZ-Run 25A sensorless ESC
2 x CustomBlitz painted Phat Bodies Bolt shells
2 x Duratrax Vendetta SC chassis (LWB) 190mm spec
Big Bore Losi Mini LST Red Alloy threaded shocks
Big Bore graphite shock towers front and rear
Titanium turnbuckles
Alloy wheel hexes
Stainless Steel Hex head screw set
CVD driveshafts front and rear
Roll bar sets front and rear
Many spares including wishbones, drive shafts, springs, arms, gears, bearings and hardware.
I will include a set of Schumacher pins or rally blocks on scale saloon wheels as shown
You will require transmitter, reciever and small size 2s lipos (upto 85mm long) to run/race