SX3 wheel options

[J.Kirkman]

Hi guys, are there other makes of wheels that fit the CAT sx3? The shumacher wheels in the kit are not very round and a bit flimsy. What do people recommend? Would like to run jconcepts rulux ideally but I can only find listings for other cars.

Thanks.

[ian h]

Hi guys, are there other makes of wheels that fit the CAT sx3? The shumacher wheels in the kit are not very round and a bit flimsy. What do people recommend? Would like to run jconcepts rulux ideally but I can only find listings for other cars.

Thanks.

I run rulux, you will need the hex on the front.

[bigred5765]

Hi guys, are there other makes of wheels that fit the CAT sx3? The shumacher wheels in the kit are not very round and a bit flimsy. What do people recommend? Would like to run jconcepts rulux ideally but I can only find listings for other cars.

Thanks.

hi mate
theres nowt wrong with the schuy rims if you need some come see us we have loads,

[J.Kirkman]

I run rulux, you will need the hex on the front.

Thanks. Which car are the rulux wheels for tho? B44 etc

[J.Kirkman]

hi mate
theres nowt wrong with the schuy rims if you need some come see us we have loads,

Cheers fella, maybe I've just had some bad ones. The fronts are fine but the rears are just not round. Had a couple of part problems during the build - Wrong size screws in bags etc and also a deformed shock top bushing. I'll be giving schmacher a call after new year as I'm led to believe they are very good at dealing with this kind of thing. Was still a very enjoyable build and looking forward to racing Matty on track.

Would still rather run jconcepts wheels but have no idea what cars wheels are transferable onto the CAT.

[ASKay]

I use 410 rear wheels (pin) on my SX3, the fronts only work if you place a shim in the HEX otherwise they bind on the hub :(, so you can only use 410 fronts if you buy some washers and then push them into the HEX socket on the wheel... once this is done they are fine....but that said, the Schumacher ones I had where also fine... just were not available when I bought a bulk order of my wheels.

[merlin_341]

I use jc rolux on my sx3 used to run with the option hex but as said they bind the hub so i got assosiateds from the B 44 partnr 9750 works great .