PDA

View Full Version : Serpent S811BE


madonrc
27-01-2012, 08:47 AM
Can i ask the people who have al lready ran with there cars the following

1. What motor and size they used

2. What batteries

3. Where you got the batteries from

Thanks in advance

nick8155
27-01-2012, 09:46 AM
I have used the tekin t8 2050 motor. A mate has used the 2650 tekin whilst another mate has the castle 2650 (shaft was too long so he had to chop some off!)
Best value batteries are the turnigy nanotech hardcase from hobbyking. They are great and perform better than my pricey smc packs. Also a 6600 2s pack will only set u back about 35.

JonyNitro
27-01-2012, 01:04 PM
I am using 1900 tekin combo, and some vampire 6200 60 c which I bought second hand for 60 ish, and giant cod for some 5300 gensace ones Qualifers for the Gens Ace, and Finals with the Vampires

badger5
27-01-2012, 01:51 PM
The serpent needs to use the standard length buggy motors like the Tekin 4030 71 mm long 1900kv motor, truggy motors are longer at approx 78mm and will not fit.

The most popular choice seems to be the Tekin 1900kv, I also use this and it has more than enough power.

The Serpent also needs to use the normal 2S stick type Lipo's commonly used in 1/10th, so are easy to get with plenty of choices. You also should really use hard case cells and not the easily damaged soft ones.

I use Intellect cells, which I brought from Demon Power Products at 60 each. You can get cheaper and lot more expensive, at the end of the day you pay your money and make your choice. From what I have heard Gens Ace from Giant Cod are also good, I would tend to stick to UK companies for peace of mind although some people do import stuff without problems.

Knitter
21-02-2012, 08:08 PM
More like an 1/10.... the way it should be...

Tekins Buggy 2050 and IP 5800/60C hardcase. But if ur not going to race theres absolutely no problems using soft case batterys as the original battery holder in this car is bullet proof.

http://img831.imageshack.us/img831/6331/img0025wo.jpg (http://imageshack.us/photo/my-images/831/img0025wo.jpg/)

single cab
02-11-2012, 09:45 PM
I use a HobbyWing 150a 2250kv and Nano-tech 5800 hardcase combo and it's fine ;)

Bart_
03-11-2012, 07:19 AM
I use
ESC: Hobbywing 150a http://www.giantshark.co.uk/xerun150asd-brushless-competitive-p-405858.html

Motor: tenshock X812 sensored 1900kv with 17T pinion http://www.funshobby.com/index.php/product-149-Tenshock+X812+6+pole+sensor+car+motor+FREE+SHIPPIN G.html

Batts:
Finals http://www.hobbyking.com/hobbyking/store/__20585__Turnigy_nano_tech_6600mah_2S2P_65_130C_Ha rdcase_Lipo_Pack.html
Heats
http://www.hobbyking.com/hobbyking/store/__17265__Turnigy_nano_tech_6000mah_2S2P_65_130C_Ha rdcase_Lipo_Pack.html

My build with pics and video
http://www.msuk-forum.co.uk/topic/145665-barts-serpent-cobra-811be-build-pics-vid-p4/page__hl__%2Bserpent+%2Bcobra

Great buggy :)