DEX210 front tyres - carpet track

[raymondkerr]

Never used CUT staggers before, so I've ordered up a set with Medium Inserts, do you run them on full width front wheels, or slim cut down wheels. I run normal staggers on the front without inserts and I cut the wheel down in width, should I do the same for CUT staggers or will they stretch over the wider wheel ?

[MatJohnson]

I ran mine on full width on sat and did the same on the x6

[/tobys]

Normal wheels with inserts for the cut staggers mate :)

[Fernandez]

I use them on slim rims with no insert on carpet.

[stephenh]

Use them on the normal wide rim with medium inserts. I thought the normal stagger tyre with no insert was better. The cut stagger gave too much bite at the front, for me at least anyway.

[raymondkerr]

cheers guys for your advice, I'll try them on normal wide rims with schy medium inserts.

:thumbsup:

[discothesnake]

Raymond, i find the cut staggers way too grippy indoors. I would stick with normal staggers.

Dave

[racingben]

I found the cut staggers to have more initial turn in than std stagger but less mid corner grip. This was with foam inserts and on std width front wheel.

I prefer to use minipins on the front and then manage the oversteer. Quicker once you're used to it (at silverstone indoors)