Lipo Sizes

[aH0tUnicorn]

Hi,

I need to know what the max height I can have the lipos to fit as my lipos are too big for the lazer zx-5 fs2 and need to buy new ones.

If anyone has some saddle lipos that fit FS just PM.

Thanks

[Neil26]

I think u can put spacers under the battery posts to increase the height or buy the carbon fibre battery plates as I did there quite a bit thinner than the kit plates

[aH0tUnicorn]

I think u can put spacers under the battery posts to increase the height or buy the carbon fibre battery plates as I did there quite a bit thinner than the kit plates

were can i source these spacers that you put under the battery posts ?

Ill try the carbon fibre battery plates once i give the spacers a try

[InsideLineModels]

were can i source these spacers that you put under the battery posts ?

Ill try the carbon fibre battery plates once i give the spacers a try

Most 3mm spacers will do the trick, we have these which are pretty good value.

Clicky (http://www.the-pred.co.uk/zencart/index.php?main_page=index&cPath=85_125)

The other option is to go for screw down posts like these (http://www.the-pred.co.uk/zencart/index.php?main_page=product_info&products_id=687)

All this is as long as your lipos slot under the top deck?

Kev

[aH0tUnicorn]

Hi,

ive put some shims on the bottom and got a much longer screw and put a lock nut on the end off the screw and then screwed the battery post on top off it so it now is long enough to fit it.