View Full Version : ALL B44 AND B44.1 OWNERS!!!,HELP PLEASEE
Hello everyone, i'm going to get a Associated b44.1 soon and i was wondering, what pinion is best to use with this setup:
Tekin 6.5t motor.
Tekin rs pro esc.
Any help is much appreciated.
Thank you.
Steven Forster
12-04-2012, 12:00 AM
best thing to do is look at the tekin gearing chart for the motor to find out what pinion range will be good for the B44/.1 associated give you a base setting but every motor is different :)
gazhillAE
12-04-2012, 09:27 AM
21/22
Are you getting a 44, or a 44.1?
They use different spurs...
I used to run my 44 with 84/22 SP V3 6.5 outdoor
Currently running 81/25 SP V3 10.5 indoor
Oh right, i'm getting a b44.1
gazhillAE
12-04-2012, 09:03 PM
What I put is correct for 44.1
Gaz
12-nitroman
13-04-2012, 01:08 PM
i use sp 5.5 and and my pinion is 19 and spur 84.
Streeter
13-04-2012, 01:10 PM
I run a reedy 6.5 on 22/81
Thanks for all the help guys :),
budfish
13-04-2012, 01:24 PM
I used to run a tekin redline 6.5t in my b44.1 21t pinion as Gaz said is perfect any bigger and it gets silly due to the 55000ish rpm
Budfish-what do you reckon about a 18t pinion?
Gaz is spot on for the 44.1 on a 81T spur.
IMO a 18 is way too small.
Ok thanks guys, i'll go for a 21t.
Mud Driver
14-04-2012, 07:50 PM
i drive an reedy 6.5T with 20t pinion and i like it the speed and the acceleration
Danny Harrison
16-04-2012, 12:29 PM
I just ordered the same setup but with 5.5T motor. I got pinions ranging from 15T to 18T, should I have gone a little bigger?
Edit, maybe thinking it's too much motor for the car after reading around more, any tips?
vBulletin® v3.8.7, Copyright ©2000-2024, vBulletin Solutions, Inc.