View Full Version : X11 Set-up Changes

pesky badger
15-04-2008, 06:38 PM
Recently got an X11 and I'm just wondering what the main set-up changes people do trackside? Also, what springs do people run front/back and what is the 'pick-up point on rocker' mentioned for the front suspension in the manual's chassis settings at the back?

:) Ta

15-04-2008, 06:56 PM
what track do you run on?

pesky badger
15-04-2008, 07:01 PM
Probably mainly astro, but certainly with a smattering of grass.

15-04-2008, 07:12 PM
this is what I ran at batley [astro with grass] courtesy of Northy :)

Springs: 6t
Pistons: kit + Valve
Oil: 35 Associated
Toe: In 1 Degree
Camber: 2 Degrees
Castor: 0 washer behind wishbone
Ground clearance: 16mm
Anti Roll Bar: None


Springs: 5.5t/Gold
Pistons: kit
Oil weights: 50wt Associated
Toe-in per side: 3 Degrees
Camber per side: 2 Degrees
Ground clearance: 22mm - or a little more if it cuts up.
Anti-roll bar: None
Rear lower upright: Upper Hole
Damper pickup point: Middle

pesky badger
15-04-2008, 07:22 PM
Thanks for that.

Maybe some set-ups could be placed in the set-up thread. :thumbsup:

15-04-2008, 07:42 PM
I will do that now! :)

pesky badger
15-04-2008, 07:56 PM
Top banana :thumbsup:

What's the effect of connecting the push rod at the top of the rocker?

How many washers do people fit - I get 9 each side without binding?

15-04-2008, 08:20 PM

see this thread i think it helps??

pesky badger
15-04-2008, 08:44 PM
Ta. Me thinks a good play is in order.

15-04-2008, 08:53 PM
always happy to help :):cool: