c4.1 set up sheet robin hood raceway
as title says anybody tell me where i can find a set up for rhr from anyone of the cml sponsored drivers.
am racing there this coming weekend and would like to go prepared with a base set up. many thanks |
Nearest to it will be tallywain I'm guessing
|
Here's what I've been running recently round RHR. Sorry it's not in a setup sheet.
Rhr test. Centro c4.1 26/02/12 Front shocks* 35 wt. stamdard no. 2's. 0.060 limiter* AE Silver springs Middle on tower, outer on wishbone* Rear shocks* 30 wt standsrd no. 1's. No limiters. AE Silver springs* 2nd hole on tower from inside, inner on wishbone* FT 0.5 degree hubs With c hub lower towers Medium wheelbase* Inner camber link 3rd hole from bottom On tower* 0.060 front ballstud washers* Front link Inner on tower.* Inner on hub.* 30degree caster blocks* Hub in middle* 7.5 motor spur 75t. Pinion 23T 22mm ride height all round* Jconcepts High clearence wing, 1 gurney showing.* Plastic bulkhead Rudebits Trapezium brass weight in front of steering rack* Avid Aluminium steering rack* Rude bits thick under servo weight* Slim stagger ribs* Yellow rears, inside and out cut off.* Jconcepts Finnisher cab forward body* Feel free to ask any questions Ben |
Ben
What way are you running the rear hubs? Left on Left more toe-in Or Left on Right for less toe in. Cheers. MiCk B. :-) |
Ben' setup sheet @ RHR (PDF)
|
Quote:
Regarding hubs, left on the right and right on the left. Thanks Ben |
All times are GMT. The time now is 02:53 AM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
oOple.com