DEX210 MM4 Conversion
I have converted my DEX210 to MM4 and cannot get any speed out of the car at all. Car was running fine in RM3 and I have not changed any settings on the ESC or Transmitter at all.
Have stripped and rebuilt the gearbox in case I had done something wrong, everything seemed to be ok, reset slipper clutch. Double checked all wiring, fitted a new sensor lead, Re-checked the settings on the ESC still very slow. Any ideas what the problem could be. Standard 13.5 motor with a Speed passion Revention stock club race ESC. |
Did you re-calibrate the esc?
|
Have you checked that the gearbox spins freely... if you over tighten the screws they can bind up, they only need to be hand tight no more
|
Gents,
I understand he got his answer and fixed the problem on the Silverstone Forum.... it was End points on his Stick TX / ESC. Shame you weren't informed here. |
Sorry guys forgot to inform I had sorted problem. Thanks anyway
|
What do you mean by 'not getting any speed at all': Does the motor not rotate as quickly or at all, or does the car feel slower (or less grippy)? :eh?:
|
All times are GMT. The time now is 10:53 PM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
oOple.com