Losi 22 bits available in Ireland
 

Hi all,

There are a half dozen DMCC members who will be debuting their Losi 22s over the next few weeks - and there are a few others across the country too. As most of you know, I'll have kit parts trackside as well as some optional bits as follows - all hopefully available from next week.

Front springs - Green, Blue, Black
Rear Springs - Yellow, Pink, Red
Tappered pistons - Couple of sets coming - more once tested
Under Lipo weights - 100g and 50g under lipo weights (can be used together to give 150g)
Pivots - 4.5 degree HRC pivots and shim kits - Brass HRC pivots coming soon
Diff parts - Silicone Nitride balls and certified flat diff rings

I won't be stocking 96mm Lipo packs or TLR weight kits, but if you want to order them from me, let me know trackside.

get stuff will good to hear your up and runing

Stainless steel under-lipo weights arrived today.
You get 1 x 101g (approx) weight and 1 x 44g weight for 17.50 euro.
Cheap in comparison to £40 for the brass equivelant.
They can be used separately or together to give 146g.
These fit nicely under saddle packs in the X6, CR2 and TLR 22.
I'll have them with me trackside on Sunday.

https://lh3.googleusercontent.com/_X...2015.28.02.jpg

"22" was awesome yesterday. I want to be really transparent with my setup to help those planning on running the car this year. The car managed laptimes that were nearly a second quicker than the CR2 on the same day!!! The on-power steering is staggering - you can drive it like a 4wd!

Setup is here - https://picasaweb.google.com/irishwi...32030690421666

Non standard extras used:
4.5 degree HRC rear pivot (In stock)
HRC antisquat shim set (In stock)
6 x 1.3mm hole tappered rear pistons (In stock)
103g Low polar lipo weight set (In stock)
Ceramic diff balls (In stock)
Certified flat diff rings (In stock)
Schumacher Yellow Minispikes
Mr"O" Chubby Rear foams
Mr"O" 4wd firm front foams

The foams are available trackside & tyres are on the way!!

MiCk B. :-)