Silverstone set up.
 

Is anyone willing to share a currant set up for silverstone with shocks on the rear for a KF2

Cheers
Ross

Give this a go?

http://i1286.photobucket.com/albums/...ps50ea0yyf.jpg

worked pretty well for me on saturday

^

Pretty much same as above for me, but on small bores now with 2 degree anti squat..

Thank guys, all set up as above :thumbsup:

Anyone know the difference between SV2 and KF2 front arms, are the SV2 arms shorter ?

SV2 number U3713
KF2 number U4095

Yep, they are shorter, resulting in a narrower front track width.

Thought so, thanks Nigel :)

Check your diff too Ross.. Mine was totally empty with only blue fluff inside :/

I'm rebuilding it over the weekend so will check.

Cheers mate

Shocks had the blue gear behind the lower cap and around the bushes and between the out drives and bearings on the diff :thumbsup:

Mine too, but belt was dry as it was leaking from the outdrives...

No wonder its been a bit of a handful!! :thumbsup:

Haha same as that :thumbsup: