oOple.com Forums

oOple.com Forums (http://www.oople.com/forums/index.php)
-   Tamiya (http://www.oople.com/forums/forumdisplay.php?f=22)
-   -   M-chassis racing Lipo cut off (http://www.oople.com/forums/showthread.php?t=200139)

cannonballmac 20-10-2018 10:15 AM

M-chassis racing Lipo cut off
 
Hi,

Just starting off some mini racing at my local club.

What type of lipo cut off is recommended if an old style Speedo is being used with lipo packs?

Any advice or tips welcome.

Wig 20-10-2018 11:36 AM

Something like this


https://hobbyking.com/en_us/hobbykin...___store=en_us


but if you have a reasonable size lipo and only running for 5 min heats you should be ok without one.

knighthawk 20-10-2018 01:14 PM

Quote:

Originally Posted by cannonballmac (Post 993605)
Hi,

Just starting off some mini racing at my local club.

What type of lipo cut off is recommended if an old style Speedo is being used with lipo packs?

Any advice or tips welcome.

What are you racing ?
As it maybe cheaper to buy an Esc with cutoff

cannonballmac 20-10-2018 11:09 PM

I did look at that but wondered what else was around. It might be one of the better options. Yeah should get at least 2 runs out of 1 pack I would hope...

cannonballmac 20-10-2018 11:11 PM

I picked up an old mtroniks and a couple of eBay specials to try. Seen a few old escs advertised for mini racing and wondered if it would be worth mucking about with.

Spoolio 10-11-2018 05:44 PM

Just use a Hobbywing Quicrun 1060, thatíll run any brushed motor that a Mini can cope with and itís got Lipo cut off built in and you can also disable reverse if needed.


All times are GMT. The time now is 05:29 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2019, vBulletin Solutions, Inc.
oOple.com