CAT KF Setups
|
James i cant get this to enlarge :-(
|
|
my wet astro set up
1 Attachment(s)
my set up from weekend
http://www.petitrc.com/setup/schumac...Wright_201312/ |
Quote:
|
Petit RC have a great database of setups here:
http://www.petitrc.com/setup/schumac...rCougarKF.html I've added a wet Astro setup from RHR which was great, would recommend it for people looking for a starting point for people running on low grip tracks. |
Cheers Tom, much appreciated. Are you spacing the steering bellcrank up any (and matching bump steer spacing on knuckle arm) on that damp rhr setup?
.... And, did you leave the rest shocks in front of the wishbone? |
Yeh, I've got 4mm under the bell cranks and 4mm under the outer Ballstud.
|
Hi
What is the idea of the washers under CTR as I have not noticed much bump steer on a SV2 which think shares the same set up as the KF CARB |
I believe it smooths the steering
|
Worksop 5/1/14 KF Setup.
Track seemed slippier this round to me. 3 degrees rear camber helped a lot also 1 degree rear alloy blocks. Finished A7. http://i220.photobucket.com/albums/d...ps0fdc100d.png |
My KF setup from Caldicot RC Racers club night last night
This thing is awesome! Ball diff really transformed the car, with the gear diff I was really struggling to get the power down but with the ball diff it was so smooth and easy to drive, it really felt like I could push it hard and the car just kept giving :lol: https://www.dropbox.com/s/xqlkc38mx8...2017012014.jpghttps://www.dropbox.com/s/xqlkc38mx8...2017012014.jpg |
Can someone please let me know what rate the kit springs are on the kf.
Cheers. |
I think they are 4 front and 2.5 rear.
|
Quote:
|
Thank you,
Gaz just a quick one to ask how well did you find your kf at southport indoor. Ran mine there today on its first time out in near kit set-up with the rear alloy block upgrade, Just felt as if i couldnt push to hard through the corners,having to back off a little.new cut staggers and blocks both in yellow,grip wasnt an issue but just felt unstable. Cheers Dave |
KF Setup for Herts Electric circuit
Will be running the KF at Herts this weekend at the Mid South regional. Never run at this circuit before. Looks like it will be dry. Does anyone have a setup for this circuit? Is it Low/Med/High traction?
Cheers, John |
All 3 if damp in the morn it will be slippy then grip comes up as it drys but then grip fades as sand comes up
|
sv 2 rear wishbones
guys
i am building a kf and put sv 2 rear wishbones to length the car. What spacing should i put there and also the pin is short is it worth getting the sv2 pin aswell? thanks for help lee |
I would try it in stock setup first before changing anything too drastic, Tom C's setup is awesome... (The std chassis one)
|
All times are GMT. The time now is 04:09 AM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
oOple.com