oOple.com Forums

oOple.com Forums (http://www.oople.com/forums/index.php)
-   Schumacher (http://www.oople.com/forums/forumdisplay.php?f=46)
-   -   K2 v2 steering blocks and lipo options , transverse or inline ?? (http://www.oople.com/forums/showthread.php?t=190217)

shaun m 22-05-2017 10:36 AM

K2 v2 steering blocks and lipo options , transverse or inline ??
 
Ran my k2 yesterday (2nd time running a shuey ) at the Torch national , ran it in the inline set up , but a lot of the others run it in the std transverse set up .

What's people opinion on the inline setup
, I found it a bit twitchy etc , still pretty happy with the car but just didn't feel %100 at ease with it.

Also I ran the std blocks , but have a pair of the v2 blocks to try , any thoughts on these ?

Cheers

Allan1875 22-05-2017 10:49 AM

Quote:

Originally Posted by shaun m (Post 973224)
Ran my k2 yesterday (2nd time running a shuey ) at the Torch national , ran it in the inline set up , but a lot of the others run it in the std transverse set up .

What's people opinion on the inline setup
, I found it a bit twitchy etc , still pretty happy with the car but just didn't feel %100 at ease with it.

Also I ran the std blocks , but have a pair of the v2 blocks to try , any thoughts on these ?

Cheers


I ran inline and V2 blocks. I've never ran across the chassis nor v1 blocks so difficult to give an opinion.

I thought the car was good, but it was a bit dusty and struggling to get all the power down. Battery across the back may have helped.

Yardy and McGhee both ran inline and V2 blocks.

shaun m 22-05-2017 10:58 AM

Quote:

Originally Posted by Allan1875 (Post 973226)
I ran inline and V2 blocks. I've never ran across the chassis nor v1 blocks so difficult to give an opinion.

I thought the car was good, but it was a bit dusty and struggling to get all the power down. Battery across the back may have helped.

Yardy and McGhee both ran inline and V2 blocks.

Cheers Allan , I was should had ask in the shuey tent (I was only pitting next door!) , was just curious to see what eveyone else thinks .

I know steve brown runs it transverse with lcg saddle lipos to get the weight low down . Cheers

AmiSMB 30-05-2017 07:33 PM

I run inline shorty with v1 block as I do not have any v2 blocks. 10degree front and 7.5 alloy hubs and run this all the time and like it.

AmiSMB 02-06-2017 11:50 AM

I am going to get my small bores out and try this setup this weekend as it seems very popular:-

http://site.petitrc.com/setup/schuma...2930/setup.jpg


All times are GMT. The time now is 08:26 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
oOple.com